• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: ST PAUL DELTEC; GRIPPER

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

ST PAUL DELTEC; GRIPPER Back to Search Results
Model Number 22 GAUGE
Device Problem Separation Failure (2547)
Patient Problem Foreign Body In Patient (2687)
Event Date 03/18/2021
Event Type  Injury  
Event Description
Information received a smiths medical implantable ports|deltec gripper needle separated and embedded under the skin inside port.The nurse went to access portacath and noticed child was scratching site, swab obtained and redressed.On flushing the portacath it was noticed it was leaking.Nurse asked another member of staff to review.She tried to replace the port needle, however the needle had not came off with the gripper and was left inside skin.The plastic gripper section was reported to coma away.The patient was then transferred to another hospital to have the needle removed under general anesthetic.Needle was successfully removed.
 
Manufacturer Narrative
H6: event problem and evaluation codes: updated after device evaluation.H10: device evaluation: the device was returned for investigation.A visual inspection and functional test were performed.Units received: sixteen (16) samples were received for evaluation; the returned samples were received decontaminated and inside a plastic fifteen (15) samples received with its original closed package and one (1) sample was received in used condition without its original package.Visual inspection results: it is observed in one sample the needle detached for the base.The complaint is confirmed.Replication of the failure mode: a needle gripper was bent and tested using fixture t98-3198 to proof if the foam assembly could be performed with bent needle condition.Results: the bent samples could not fix in the t98-3198 cavities to perform the foam assembly.The root cause is the product became damaged after it left shm facilities.The cause of the reported problem could not be determined.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
DELTEC
Type of Device
GRIPPER
Manufacturer (Section D)
ST PAUL
1265 grey fox rd.
st. paul MN 55112
Manufacturer (Section G)
NULL
1265 grey fox rd.
st. paul MN 55112
Manufacturer Contact
jim vegel
6000 nathan lane north
minneapolis, MN 55442
MDR Report Key11720564
MDR Text Key247212256
Report Number3012307300-2021-03425
Device Sequence Number1
Product Code FPA
UDI-Device Identifier10610586015786
UDI-Public10610586015786
Combination Product (y/n)N
Reporter Country CodeUK
PMA/PMN Number
K870866
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Foreign,User Facility
Reporter Occupation Other Health Care Professional
Type of Report Initial,Followup,Followup
Report Date 06/14/2023
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model Number22 GAUGE
Device Catalogue Number21-2714-24
Device Lot Number4002612
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer04/20/2021
Is the Reporter a Health Professional? Yes
Was the Report Sent to FDA? No
Initial Date Manufacturer Received 03/26/2021
Initial Date FDA Received04/23/2021
Supplement Dates Manufacturer Received09/22/2021
06/14/2023
Supplement Dates FDA Received03/07/2022
06/14/2023
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured09/10/2020
Is the Device Single Use? No
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Outcome(s) Required Intervention;
Patient Age10 YR
Patient SexFemale
-
-