Model Number 1504-11-206 |
Device Problem
Difficult to Insert (1316)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 06/28/2021 |
Event Type
malfunction
|
Manufacturer Narrative
|
Product complaint # (b)(4).If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Event Description
|
It was reported that surgeon complains about femur being very hard to seat/implant on patient.
|
|
Manufacturer Narrative
|
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
Event Description
|
Additional information received stated that no instrument was broken, no loosening, and no adverse consequences that affect the patient.
|
|
Manufacturer Narrative
|
Product complaint # (b)(4).Investigation summary: no device associated with this report was received for examination.Depuy synthes considers the investigation closed at this time.Should additional information be received, the information will be reviewed and the investigation may be re-opened as necessary.Device history lot: product code 150411206, work order (b)(4) was manufactured on 16-feb-2021.11 parts were manufactured per specification and all raw materials met specification.Scrap: 1 part from this lot was scrapped: scrap code a016: base metal visible.This concerns base metal being visible through the porous coating on the parts.There is no correlation between this scrap reason and the failure mode of the complaint.Reprocessing: there was no material reprocessing reports (mrr) associated with this lot.Non-conformance: 1 non-conformances associated with this lot: nr-0158788 is related to a furnace burn that had been processed with a quantity of parts exceeding the maximum allowable quantity.Based on the analysis from metallurgy, r&d and fatigue testing that was carried out it was determined that there was no impact to product design or safety and no impact to patient.
|
|
Search Alerts/Recalls
|