|
Model Number 283910000 |
Device Problem
Migration or Expulsion of Device (1395)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 02/25/2021 |
Event Type
malfunction
|
Manufacturer Narrative
|
Complainant part is expected to be returned for manufacturer review/investigation, but has yet to be received.Without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Event Description
|
Device report from synthes reports an event in (b)(6) as follows: it was reported that on (b)(6) 2021, the patient underwent for a vertebral arthrodesis procedure with pedicle screw cementation.During the surgery, the system that pushes the cement into the cannula / screw (pump system with water) did not work properly due to the water leaking.It was not possible to cement all the screws of the implant.The surgery was completed successfully with 30 minutes delay reported.There were no patient consequences are reported.Concomitant device reported: unknown screw (part# unknown, lot# unknown, quantity unknown).This report is for (1) confidence spinal cmt sys, 11c.This report is 3 of 3 (b)(4).
|
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: h3, h4, h6- the confidence spinal cmt sys, 11c (p/n: 283910000, lot #: unk) was returned and received at us cq.Upon visual inspection, only confidence pump assembly (p/n: 887014225) was returned from the kit.Some sterilized water was observed behind the piston assembly.The connector was inspected, and no issues were observed.The complaint condition was confirmed for the confidence spinal cmt sys, 11c (p/n: 283910000, lot #: unk) as no sterilized water was able to transfer through the connector because of the internal leakage into the pump body.There is no indication that a design or manufacturing issue has caused the issue and hence the root cause cannot be determined.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot: dhr cannot be performed as the lot number is unk.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Search Alerts/Recalls
|
|
|