The patient samples were returned for investigation.An interfering factor against the streptavidin component of the reagent has been confirmed within the sample, which leads to elevated elecsys ft3 iii and ft4 iii results and suppressed tsh concentrations.Product labeling states: "in rare cases, interference due to extremely high titers of antibodies to analyte-specific antibodies, streptavidin or ruthenium can occur.These effects are minimized by suitable test design." a general product problem can be excluded.
|
There was an allegation of a patient with hypothyroidism since 2002 who received tsh, ft4, and ft3 results indicating hyperthyroidism with the cobas e 801 module serial number (b)(4).The patient had been taken off euthyrox on an unknown date and prescribed tirodril, prednisone, and propanolol for hyperthyroidism allegedly due to the tsh, ft4, and ft3 results.The subsequent results from the patient were not correlating to the treatment and therefore found to be incorrect.Under the suspicion of an analytical interference, the patient was then suspected to have severe hypothyroidism and treatment for hypothyroidism was started again.The patient was treated with tirodril from (b)(6) 2021.Currently, tirodril and propanolol are removed and the patient has been prescribed euthyrox again.After starting treatment for hypothyroidism, the patient was admitted to the hospital on (b)(6) 2021 for allegedly presenting with acute and severe myositis that they suspect may be due to hypothyroidism.The patient was discharged on (b)(6) 2021.The patient is currently at home being monitored.Additional discrepant results provided by the customer are as follows: on (b)(6) 2021 with sample id (b)(6) from the customer site, the patient had a tsh of 21.70, an ft4 of 0.76, and an ft3 of 4.54.On (b)(6) 2021 with sample id (b)(6) from a hospital with a siemens analyzer, the patient had a tsh of 21.70, an ft4 of 0.45, and an ft3 of 1.3.From the customer site, the patient had a tsh of 26.50, an ft4 of 0.98, and an ft3 of 4.59.On (b)(6) 2021 with sample id (b)(6) from the hospital with a siemens analyzer, the patient had a tsh of 107, an ft4 of 0.46, and an ft3 of 1.4.The units of measure were not provided.This medwatch is for ft3.Refer to the medwatch with patient identifier (b)(6) for the ft4 assay and (b)(6) for the tsh assay.
|