MAUDE Adverse Event Report: PHILIPS IMAGE GUIDED THERAPY CORPORATION ANGIOSCULPT EVO RX PTCA; CATHETER, PTCA, CUTTING/SCORING

Model Number 2200-3510-B

Device Problem Entrapment of Device (1212)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 10/11/2021

Event Type  Injury  

Manufacturer Narrative

The patient's dob, age at time of event, weight, ethnicity, and race are unknown.This information was not available from the facility.Patient information regarding relevant tests/laboratory data or medical history are unknown.The information was not available from the facility.Report source: foreign- (b)(6).The angiosculpt device was lost at the facility, thus no returned product investigation was performed.Per the ifu, if unusual resistance is felt when the catheter is being manipulated, carefully remove the entire catheter system.

Event Description

The angiosculpt device was used to treat a moderately tortuous and moderately calcified proximal rca with 90% isr and suspected blood clot.A sion blue guidewire was inserted and an altaview ivus catheter was loaded onto the guidewire and removed with no issues.Then, a filtrap guidewide was inserted and the sion blue guidewire was removed.The angiosculpt device was loaded onto the filtrap guidewire and was inflated 5 times to 16 atm.Upon removal, strong resistance was encountered, thus the filtrap and angiosculpt were removed together as a unit.Rewiring of the vessel was performed and the procedure was completed with a non-angiosculpt dcb.No patient injury reported.This adverse event is being reported because the angiosculpt got stuck on a non-manufacturer''s guide wire and removed as a unit.Placement of a new guide wire was necessary to complete the procedure.

Manufacturer Narrative

The patient's dob, age at time of event, weight, ethnicity, and race are unknown.This information was not available from the facility.Patient information regarding relevant tests/laboratory data or medical history are unknown.The information was not available from the facility.Report source: foreign- (b)(6).The angiosculpt device was lost at the facility, thus no returned product investigation was performed.Per the ifu, if unusual resistance is felt when the catheter is being manipulated, carefully remove the entire catheter system.

Event Description

The angiosculpt device was used to treat a moderately tortuous and moderately calcified proximal rca with 90% isr and suspected blood clot.A sion blue guidewire was inserted and an altaview ivus catheter was loaded onto the guidewire and removed with no issues.Then, a filtrap guidewide was inserted and the sion blue guidewire was removed.The angiosculpt device was loaded onto the filtrap guidewire and was inflated 5 times to 16 atm.Upon removal, strong resistance was encountered, thus the filtrap and angiosculpt were removed together as a unit.Rewiring of the vessel was performed and the procedure was completed with a non-angiosculpt dcb.No patient injury reported.This adverse event is being reported because the angiosculpt got stuck on a non-manufacturer''s guide wire and removed as a unit.Placement of a new guide wire was necessary to complete the procedure.

Manufacturer Narrative

Blocks d1/ g1: manufacturer name and site name were updated from spectranetics to philips image guided therapy corporation to match the information on the product label.Submission of this report does not, in itself, represent a conclusion by the manufacturer and/or authorized representative or the national competent authority that the content of this report is complete or accurate, that the medical device(s) listed failed in any manner and/or that the medical device(s) caused or contributed to an alleged death or deterioration in the state of the health of any person.

• Brand Name: ANGIOSCULPT EVO RX PTCA
• Type of Device: CATHETER, PTCA, CUTTING/SCORING
• Manufacturer (Section D): PHILIPS IMAGE GUIDED THERAPY CORPORATION; 5055 brandin court; fremont CA 94538
• Manufacturer (Section G): PHILIPS IMAGE GUIDED THERAPY CORPORATION; 5055 brandin court; fremont CA 94538
• Manufacturer Contact: ana tan ; 5055 brandin court; fremont, CA 94538
• MDR Report Key: 12817355
• MDR Text Key: 285193004
• Report Number: 3005462046-2021-00065
• Device Sequence Number: 1
• Product Code: NWX
• UDI-Device Identifier: 00813132026929
• UDI-Public: 00813132026929
• Combination Product (y/n): N
• Reporter Country Code: JA
• PMA/PMN Number: P050018
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date: 08/08/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Device Operator: Health Professional
• Device Expiration Date: 03/06/2022
• Device Model Number: 2200-3510-B
• Device Catalogue Number: 2200-3510-B
• Device Lot Number: G21030018
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Was the Report Sent to FDA?: No
• Initial Date Manufacturer Received: 10/19/2021
• Initial Date FDA Received: 11/15/2021
• Supplement Dates Manufacturer Received: 10/19/2021
• Supplement Dates FDA Received: 08/08/2023
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 03/06/2021
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Treatment: FILTRAP GUIDEWIRE, MFG AND SIZE UNK; MEDTRONIC: 6F LAUNCHER GUIDE CATHETER; TERUMO: 6F RADIFOCUS INTRODUCER SHEATH
• Patient Outcome(s): Other