SMITH & NEPHEW, INC. R3 20 DEG XLPE ACET LNR 32MM X 52MM; PROSTHESIS, HIP, SEMI-CONSTRAINED, METAL/POLYMER, CEMENTED
|
Back to Search Results |
|
Model Number 71337652 |
Device Problem
Device Dislodged or Dislocated (2923)
|
Patient Problems
Failure of Implant (1924); Discomfort (2330); Ambulation Difficulties (2544); Inadequate Osseointegration (2646)
|
Event Date 02/01/2022 |
Event Type
Injury
|
Event Description
|
It was reported that, on (b)(6) 2021, the patient underwent left total hip arthroplasty to improve the structure of the patient's left hip, relieve pain and improve the quality of life.The prosthesis was normal and recovered well after operation.On (b)(6) 2022, the patient felt an abnormal sound of the left hip joint, which was obvious when walking and needed to walk with a crutch.On (b)(6) 2022, a film in the outpatient department of the hospital was taken, which suggested loosening of the r3 20 deg xlpe acet lnr 32 mm x 52 mm.On (b)(6) 2022, the patient underwent surgical incision and exploration, it was found that the liner was loose and the liner buckle was worn, and also that the femoral head was worn; therefore, both components were exchanged.The patient is currently undergoing postoperative rehabilitation treatment.
|
|
Manufacturer Narrative
|
Internal complaint reference: (b)(4).
|
|
Manufacturer Narrative
|
The device was not returned for evaluation but the pictures were reviewed, and they confirm that the liner was no longer in its proper orientation.The clinical/medical investigation concluded that, the provided four x-rays and photo of the explants were reviewed.The x-ray taken prior to the revision and the photo of the explants confirms that the liner was no longer in its proper orientation as reported in the event description.However, the images, do not aid in the clinical investigation of the root cause of the reported loosening of the liner and wear of the femoral head.Therefore, based on insufficient information, a thorough medical assessment could not be performed at this time but the patient impact is limited to the revision procedure.Should any additional relevant clinical information be provided, this complaint would be re-assessed.All documents and images provided as of this date have been reviewed and considered and unless noted do not contribute to the clinical/medical investigation.A review of the manufacturing records did not reveal a manufacturing abnormality that could have caused or contributed to the reported incident.A review of complaint history for the part number over the past 12 months and for the batch number based on historical data of the device did not reveal similar events for the listed device.A review of the instructions for use documents for total hip systems revealed that loosening has been identified as a adverse events in primary and revision surgery.A review of the risk management file revealed this failure mode was previously identified.The anticipated risk level is still adequate.A historical review concluded that there are no prior actions related to this product and event.At this time, we have no reason to suspect that the product failed to meet any product specifications at the time of manufacture.Factors and/or some potential probable causes that could contribute to the reported event have been identified as abnormal motion over time, bone degeneration, fit/sizing issue, lack of ingrowth, lifetime of device, and/or traumatic injury.The contribution of the device to the reported event could be corroborated since the liner was no longer in its proper orientation.Based on this investigation, the need for corrective action is not indicated.Should the device or additional information be received, the complaint will be reopened.No further investigation is warranted for this complaint; however, we will continue to monitor for future complaints and investigate as necessary.We consider this investigation closed.
|
|
Search Alerts/Recalls
|
|
|