MAUDE Adverse Event Report: SYNTHES GMBH CABLE CUTTER-STANDARD; CUTTER, WIRE

Catalog Number 391.905

Device Problem Break (1069)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 03/11/2022

Event Type  malfunction  

Event Description

Device report from synthes reports an event in (b)(6) as follows: it was reported that on (b)(6) 2022, during an incoming inspection at the loaner set department at loc, it was noticed that a piece of the cutting blade had broken off.There was no surgery impact and there was no patient impact.This report involves one (1) cable cutter-standard.This is report 1 of 1 for (b)(4).

Manufacturer Narrative

Complainant part is expected to be returned for manufacturer review/investigation, but has yet to be received.Reporter is a j&j employee.The investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H10 additional narrative: e1: prior to discovery of malfunction at stocking/loan site, instrument had been used at: (b)(6).There is no device allegation or allegation of patient injury from this site.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: h3, h6: part: 391.905 lot: 368p104 manufacturing site: tuttlingen supplier: n/a release to warehouse date: october 14, 2021 expiration date: n/a a manufacturing record evaluation was performed for the finished article lot and no non-conformances were identified.The product was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that the cable cutter std has the cutting blade broken.Broken portion was not returned.No other issues were detected.A dimensional inspection for the cable cutter std was unable to be performed due to post manufacturing damage.The observed condition of the device was consistent with a random component failure that may have been caused by exposure to unintended forces.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.The overall complaint was confirmed as the observed condition of the cable cutter std would contribute to the complained device issue.There is no indication that a design or manufacturing issue has caused the complaint condition and hence the root cause cannot be determined.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Drawing/specifications reviewed current and manufactured revisions were reviewed.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.D9.

• Brand Name: CABLE CUTTER-STANDARD
• Type of Device: CUTTER, WIRE
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): SYNTHES TUTTLINGEN; unter hasslen 5; tuttlingen 78532 ; GM 78532
• Manufacturer Contact: kara ditty-bovard ; 1302 wright lane east; west chester, PA 19380 ; 6107195000
• MDR Report Key: 13894703
• MDR Text Key: 288782906
• Report Number: 8030965-2022-01881
• Device Sequence Number: 1
• Product Code: HXZ
• UDI-Device Identifier: 07611819719873
• UDI-Public: (01)07611819719873
• Combination Product (y/n): N
• Reporter Country Code: GM
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 03/24/2022
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 391.905
• Device Lot Number: 368P104
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 05/11/2022
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 10/14/2021
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1