OLYMPUS WINTER & IBE GMBH PUNCH, FOR BLADDER STONES, OPTICAL; SUCTION/IRRIGATION ACCESSORIES
|
Back to Search Results |
|
Model Number A3661 |
Device Problem
Material Deformation (2976)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 03/30/2022 |
Event Type
malfunction
|
Manufacturer Narrative
|
The suspect medical device has not yet been returned to olympus for evaluation/investigation.Therefore, the exact cause of the user's experience and the reported phenomenon could not be determined and is being judged as unknown.However, if the suspect medical device is returned for evaluation/investigation or additional significant information becomes available, this report will be updated.
|
|
Event Description
|
Olympus was informed that during an unspecified procedure the ceramic insulations at the distal end of two resection sheaths broke off one after the other and fragments fell into the patient's bladder.Presumably, this may have been caused by the punch for bladder stones used during the procedure, which allegedly was slightly deformed at its distal end.No fragments remained inside the patient since they were reportedly broken into smaller pieces and then flushed out using an ellik evacuator.This caused a certain delay to the procedure, which however, was not considered medically relevant for the patient.No further information was provided but there was no report about an adverse event or patient injury.This incident has already been reported with mfr report # 9610773 - 2022 - 00120 and mfr report # 9610773 - 2022 - 00121 submitted for the two olympus resection sheaths used during the procedure.
|
|
Manufacturer Narrative
|
The suspect medical device was returned to the manufacturer for evaluation/investigation.The evaluation/investigation confirmed a deformation, more specifically a dent and several scratches, at the distal end of the bladder stone punch.Due to this damage, when combined with the a22041a resection sheaths, the bladder stone punch scraped against the inside of the sheaths causing the ceramic insulation at the distal end of the resection sheaths to break off.The dent and scratches inside the opening of the punch were most likely caused by using great force when fragmenting a bladder stone.As a consequence, this event/incident can most likely be attributed to user error.A material or quality problem can be excluded since a manufacturing and quality control review was performed for the affected lot number of the bladder stone punch without showing any abnormalities.The case will be closed on olympus side with no further actions.The reported event/incident will be recorded for trending and surveillance purposes and the user will be informed about the investigation results.
|
|
Search Alerts/Recalls
|
|
|