|
Model Number M00562341 |
Device Problem
Failure to Deliver Energy (1211)
|
Patient Problem
Hemorrhage/Bleeding (1888)
|
Event Date 02/17/2022 |
Event Type
Injury
|
Manufacturer Narrative
|
(b)(4).The device has not been received for analysis.Upon receipt and completion of the problem analysis of the complaint device, if there is any further relevant information from that review, a supplemental medwatch will be filed.
|
|
Event Description
|
It was reported to boston scientific corporation that a captivator medium hexagonal stiff snare was used to remove a large pedunculated polyp with stalk during a polypectomy procedure performed on (b)(6) 2022.It was reported that during the procedure and inside the patient, the snare cut the polyp but didn't cauterize.They could hear the pedal was working but electrical energy wasn't working at all.An artery was cut and a clip was placed and the patient had to be admitted for re-embolization of polypectomy.The patient was admitted for two days with blood administered.
|
|
Event Description
|
It was reported to boston scientific corporation that a captivator medium hexagonal stiff snare was used to remove a large pedunculated polyp with stalk during a polypectomy procedure performed on (b)(6) 2022.It was reported that during the procedure and inside the patient, the snare cut the polyp but didn't cauterize.They could hear the pedal was working but electrical energy wasn't working at all.An artery was cut and a clip was placed and the patient had to be admitted for re-embolization of polypectomy.The patient was admitted for two days with blood administered.***additional information received on april 14, 2022*** per medwatch report, the erbe machine was checked then the green light was on informing that pad was in good placement and would be safe to cautery cut the polyp.However, the cautery was unable to cauterize the area and patient developed arterial bleed.They applied clips and epinephrine was injected and then the patient was discharged.Later that evening, the patient developed additional bleeding and was admitted to the hospital for re-embolization procedure.They performed the procedure and the patient was discharged after two days.
|
|
Manufacturer Narrative
|
Block g2: report source (user facility)
maude report mw5108459 received on april 14, 2022.Block h6:
patient code e0506 captures the reportable event of hemorrhage/bleeding.Impact code f08 captures the reportable event of hospitalization.Impact code f2302 captures the reportable event of blood transfusion.Impact code f23 captures the reportable event of the required intervention and the re-embolization of polypectomy.Medical device problem code a090402 captures the reportable event of device unable to deliver energy.Conclusion code d17 is being used in lieu of an adequate conclusion code for "device not returned."
block h10:
the device has not been received for analysis.Upon receipt and completion of the problem analysis of the complaint device, if there is any further relevant information from that review, a supplemental medwatch will be filed.Block h11:
blocks b5 (describe event or problem), g2 (report source), and block h10 (additional mfr narrative) has been updated based on the additional information received on april 14, 2022.Correction: block b2 (outcomes attrib to adv event).
|
|
Manufacturer Narrative
|
Block g2: report source (user facility) maude report mw5108459 received on april 14, 2022.Block h6: patient code e0506 captures the reportable event of hemorrhage/bleeding.Impact code f08 captures the reportable event of hospitalization.Impact code f2302 captures the reportable event of blood transfusion.Impact code f23 captures the reportable event of the required intervention and the re-embolization of polypectomy.Medical device problem code a090402 captures the reportable event of device unable to deliver energy.Conclusion code d17 is being used in lieu of an adequate conclusion code for "device not returned." block h10: the device has not been received for analysis.Upon receipt and completion of the problem analysis of the complaint device, if there is any further relevant information from that review, a supplemental medwatch will be filed.Block h11: correction: block d4 (lot number) the reported lot number is 0028494728; however the lot number listed in the medwatch form is 0028201832.
|
|
Event Description
|
It was reported to boston scientific corporation that a captivator medium hexagonal stiff snare was used to remove a large pedunculated polyp with stalk during a polypectomy procedure performed on (b)(6), 2022.It was reported that during the procedure and inside the patient, the snare cut the polyp but didn't cauterize.They could hear the pedal was working but electrical energy wasn't working at all.An artery was cut and a clip was placed and the patient had to be admitted for re-embolization of polypectomy.The patient was admitted for two days with blood administered.The device has not been received for analysis.Upon receipt and completion of the problem analysis of the complaint device, if there is any further relevant information from that review, a supplemental medwatch will be filed.Additional information received on april 14, 2022 per medwatch report, the erbe machine was checked then the green light was on informing that pad was in good placement and would be safe to cautery cut the polyp.However, the cautery was unable to cauterize the area and patient developed arterial bleed.They applied clips and epinephrine was injected and then the patient was discharged.Later that evening, the patient developed additional bleeding and was admitted to the hospital for re-embolization procedure.They performed the procedure and the patient was discharged after two days.
|
|
Search Alerts/Recalls
|
|
|