Model Number PNDL, 5BV TVH TP 31G 5MM100CT 30/CS |
Device Problems
Material Twisted/Bent (2981); No Flow (2991)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 03/17/2022 |
Event Type
malfunction
|
Manufacturer Narrative
|
Internal report reference number: (b)(4).Pen needles were not returned for investigation.Note 1: customer contacted manufacturer on 22-mar-2022 and stated she had contacted pharmacy who advised her they can issue replacement pen needles but not until (b)(6) 2022.Customer stated the pharmacy advised her they do not know what the cost will be until the needles are dispensed to customer.Customer stated that she should not have to pay for the pen needle replacement.Note 2: manufacturer contacted customer in a follow-up call on 29-mar-2022 to ensure that the initial concern was resolved - able to establish contact with customer who stated the initial concern has been resolved.
|
|
Event Description
|
Consumer reported complaint for inaccurate dispense/aspiration and bent needle for the 31g trueplus pen needles.Customer stated that when she used the pen needles she was not able to draw up the amount of insulin needed and that the insulin "oozed" out and would not flow through the pen needle.Customer also stated that the needles were bent and unable to be used.Customer stated that she has wasted about dozen and a half of the pen needles.Customer stated the package had not been open or damaged when received.Customer is using compatible product and the pen needle is properly aligned.At the time of the call the customer felt well and did not report any symptoms.Customer did not claim to be injured while using the pen needles and no medical intervention related to the use of the product was reported.
|
|
Manufacturer Narrative
|
Sections with additional information as of 13-may-2022: h6: updated fda's type of investigation, investigation findings, and investigation conclusions.Complaint was forwarded to supplier quality based on complaint's description for investigations.No product was returned to thi.Internal evaluation has been completed by the manufacturer.Reported defect not reproduced on retention samples.Most likely underlying root cause: mlc-009: use error caused or contributed to event.
|
|
Search Alerts/Recalls
|