|
Catalog Number CON-HL-390 |
Device Problems
Failure to Power Up (1476); Power Problem (3010)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Type
malfunction
|
Manufacturer Narrative
|
One device was returned for investigation.The returned sample was visually inspected, and the device was noted to have a cracked tank cover, a damaged printed circuit board (pcb) and power switch were also noted.The investigator plugged line cord into power source.No power.Removed front cover and pcb to check on the connection between pcb and power switch.It was determined the connection between the pcb and power switch is damaged.It was reported that the damage was likely caused by wear and tear use of the switch by the customer.No action taken due to the age and condition of the device.It was deemed beyond economical repair and will be scrapped.A manufacturing dhr review was not performed because the results of the complaint investigation do not indicate a problem with the manufacture of the device.No causes or potential causes of the customer's reported problem were found during the review of service and repair records.
|
|
Event Description
|
It was reported that the fluid warming device had no power.No patient injury was reported.No other information has been provided at this time.
|
|
Search Alerts/Recalls
|
|
|