MAUDE Adverse Event Report: MEDOS INTERNATIONAL SÃ RL CH SINGLE-INNER SETSCREW; ORTHOSIS, SPINAL PEDICLE FIXATION, FOR DEGENERATIVE DISC DISEASE

Model Number 179702000

Device Problem Material Twisted/Bent (2981)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Type  malfunction  

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Additional device product codes: (b)(4).Reporter is a j&j employee.A manufacturing record evaluation was performed for the finished device product code: 179702000, lot number: 279326, it was electronically reviewed and no non-conformances / manufacturing irregularities were identified during the manufacturing process.The product was released on: 27/04/2020.The product was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that the recess of the single-inner setscrew appears to be stripped.No other product problems identified.A dimensional inspection was unable to be performed due to device design.The observed condition of the device was consistent with a random component failure that may have been caused by exposure to unintended forces as mentioned in the event description.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.The overall complaint was confirmed as the observed condition of the single-inner setscrew would contribute to the complained device issue.There is no indication that a design or manufacturing issue has caused the complaint condition and hence the root cause cannot be determined.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Event Description

Device report from synthes reports an event in japan as follows: it was reported that on an unknown date, the devices were received as a blind unit.This report involves one (1) expedium spine system single inner set screw 5.5.This is report 12 of 17 for (b)(4).

• Brand Name: SINGLE-INNER SETSCREW
• Type of Device: ORTHOSIS, SPINAL PEDICLE FIXATION, FOR DEGENERATIVE DISC DISEASE
• Manufacturer (Section D): MEDOS INTERNATIONAL SÃ RL CH; chemin-blanc 38; le locle 02400 ; SZ 02400
• Manufacturer Contact: kate karberg ; chemin-blanc 38; le locle 02400 ; SZ 02400 ; 3035526892
• MDR Report Key: 14755129
• MDR Text Key: 302069016
• Report Number: 1526439-2022-00907
• Device Sequence Number: 1
• Product Code: NKB
• UDI-Device Identifier: 10705034064307
• UDI-Public: (01)10705034064307
• Combination Product (y/n): N
• Reporter Country Code: JA
• PMA/PMN Number: K160904
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Company Representative
• Reporter Occupation: Other
• Type of Report: Initial

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 179702000
• Device Catalogue Number: 179702000
• Device Lot Number: 279326
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 06/01/2022
• Initial Date Manufacturer Received: 05/23/2022
• Initial Date FDA Received: 06/21/2022
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 04/27/2020
• Is the Device Single Use?: Yes
• Type of Device Usage: Unknown
• Patient Sequence Number: 1