Model Number 71992-01 |
Device Problem
Low Readings (2460)
|
Patient Problems
Diabetic Ketoacidosis (2364); Diaphoresis (2452); Polydipsia (2604)
|
Event Date 08/12/2022 |
Event Type
Injury
|
Manufacturer Narrative
|
At this time, product has not yet been returned.An extended investigation has been performed for the reported complaint, and it has been determined that there was no indication that the product did not meet specification.The dhrs (device history record) for the libre sensor and libre sensor kit were reviewed, and the dhrs showed the libre sensor and libre sensor kit passed all tests prior to release.If the product is returned, a physical investigation will be performed and a follow-up report submitted.All pertinent information available to abbott diabetes care has been submitted.
|
|
Event Description
|
A customer reported a low reading issue with the adc device.The customer reported a sensor reading of 'lo' (< 40 mg/dl) while displaying symptoms of sweating, intense thirst, and excessive urination.The customer was taken to hospital where they were diagnosed with diabetic ketoacidosis and given unspecified treatment (customer could not provide).The customer was hospitalized for unspecified duration.There was no report of death or permanent injury associated with this event.
|
|
Event Description
|
A customer reported a low reading issue with the adc device.The customer reported a sensor reading of 'lo' (< 40 mg/dl) while displaying symptoms of sweating, intense thirst, and excessive urination.The customer was taken to hospital where they were diagnosed with diabetic ketoacidosis and given unspecified treatment (customer could not provide).The customer was hospitalized for unspecified duration.There was no report of death or permanent injury associated with this event.
|
|
Manufacturer Narrative
|
Sensor (b)(6) has been returned and investigated.The sensor plug is fully seated and no issues were observed.Extracted data from the returned sensor using approved software.The sensor was found to be in sensor state 5 (indicating normal termination).Inspected the plug assembly, no issues were observed.The current was applied to the sensor to perform accuracy testing while in the test fixture.All results were within specification.Poise voltage and sensor thermistor testing were both within specification, indicating the sensor was providing accurate glucose readings.No malfunction or product deficiency was identified.All pertinent information available to abbott diabetes care has been submitted.
|
|
Search Alerts/Recalls
|