ICU MEDICAL DE MEXICO, S. DE R.L. DE C.V. TRANSPAC¿ IT TRIFURCATED MONITORING KIT, 60", 3ML FLUSH DEVICES, MACRODRIP (POLE; TRANSDUCER, BLOOD-PRESSURE, EXTRAVASCULAR
|
Back to Search Results |
|
Model Number 42800-07 |
Device Problem
Disconnection (1171)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 08/01/2022 |
Event Type
malfunction
|
Manufacturer Narrative
|
The device is available to be returned for evaluation; however, it has not yet been received.
|
|
Event Description
|
The event occurred on an unspecified date and involved a transpac¿ it trifurcated monitoring kit, 60", 3ml flush devices, macrodrip (pole mount).The customer reported that the device came back repacked as defective as it disconnected while in use during a case.There was no report of human harm and no other information is available regarding this reported issue at this time.
|
|
Manufacturer Narrative
|
The following items wer received for investigation: one case (23 of 75) of 10 new list #42800-07, transpac¿ it trifurcated monitoring kit, 60", 3ml flush devices, macrodrip (pole mount); lot #5819705.One case (16 of 75) of 10 new list #42800-07, transpac¿ it trifurcated monitoring kit, 60", 3ml flush devices, macrodrip (pole mount); lot #5819705.Visual: 20 new list #42800-07, trifurcated monitoring kits were received.A similar complaint with the same lot number was confirmed for separation due to the tubing being tacky.No visual anomalies were observed on the returned sets.Functional: when the returned sets were primed and pressure leak tested, no leaks were observed.A pull test was conducted between the pvc tubing and the tubing pocket of the transducer.All the sets pulled within the specification limits.For 19 out of 20 sets, the pvc tubing pulled off from the luer over 6 lbs which is within the specifications limit of 6 lbs.For the remaining set, the pvc tubing broke near the luer over 6 lbs.19 out of 20 sets had tubing pockets that were observed to be tacky.The probable cause of the tubing pockets being tacky had occurred due to uv adhesive not being fully cured during the manufacturing assembly process.The lot history was reviewed and no nonconformities were identified that may have contributed to the reported complaint.D9 - date returned to mfg: 9/9/2022.
|
|
Search Alerts/Recalls
|
|
|