• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: AOMORI OLYMPUS CO., LTD. DISPOSABLE GRASPING FORCEPS

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

AOMORI OLYMPUS CO., LTD. DISPOSABLE GRASPING FORCEPS Back to Search Results
Model Number FG-51D
Device Problems Deformation Due to Compressive Stress (2889); Material Split, Cut or Torn (4008)
Patient Problem No Clinical Signs, Symptoms or Conditions (4582)
Event Date 02/24/2022
Event Type  malfunction  
Event Description
An olympus representative reported to olympus, on behalf of the user, prior to an unknown procedure, three disposable grasping forceps could not be opened and/or closed.The procedure was completed with a similar device.It was further reported, this type of procedure takes 14 minutes, however; the start of this procedure was delayed by 30 minutes due to this event.There was no patient harm associated with this event.The first grasping forceps is being reported on the medwatch with patient identifier (b)(6).The third grasping forceps is being reported on the medwatch with patient identifier (b)(6).
 
Manufacturer Narrative
The suspect device was sent to olympus for evaluation.The grasping portion was opened when the device was received.The tube was torn near the black tube and the tube near the torn portion was compressively buckled.The grasping portion was unable to retract into the tube by pulling the ring and was unable to close.When the ring was operated by holding the torn area after the tube was straightened, the grasping portion was able to open and close.No deformities were found in the grasping portion and no foreign material had adhered to the grasping portion.During replication testing, the basket was opened and closed by tightly coiling the insertion portion as instructed by the instruction manual warnings.The tube was compressively buckled near the black tube during the first attempt to close the basket.A review of the device history record found no deviations that could have caused or contributed to the damage to the tube.The device shipped according to specifications.Based on the results of the legal manufacturer's investigation, it can be inferred that either the products did not meet the specifications or device handling might have contributed to the reported event.If the reported event was caused by a product that did not meet specifications, the likely cause may be a force to open and close the basket was greater than the standard value, therefore, a compression force was applied to the tube when operating the basket, the tube was buckled compressively near the black tube, further operation of the device broke the tube which prevented the basket from opening and closing.If the reported event was caused by device handling, it is likely that the tube was bent at an acute angle, the ring was operated and the sliding resistance between the tube and operation wire increased causing compressive buckling of the tube.Further operation of the device in that condition caused the tube to break which prevented the basket from opening and closing.However, a definitive root cause of the reported issue could not be identified.The device's instruction manual provides the following warning, which may help to prevent the issue: "do not coil the insertion portion with a diameter of less than 15 cm.This could damage the insertion portion." "never use excessive force to open or close the grasping portion.This could damage the instrument." "when the grasping portion does not open and/or close smoothly, do not apply force but set the scope¿s angle back, or move the position of the grasping portion until the basket opens and closes smoothly.If the action is forced, the tube may stretch and the resistance of the handle may increase.Also the calculus may not be retrieved, and/or the grasping portion with calculus engaged may not be removed from the body." olympus will continue to monitor field performance for this device.Investigation activities have been opened to manage the actions related to this issue and any required mdr reporting.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
DISPOSABLE GRASPING FORCEPS
Type of Device
DISPOSABLE GRASPING FORCEPS
Manufacturer (Section D)
AOMORI OLYMPUS CO., LTD.
2-248-1 okkonoki
kuroishi-shi, aomori 036-0 357
JA  036-0357
Manufacturer Contact
masaharu hirose
2-248-1 okkonoki
kuroishi-shi, aomori 036-0-357
JA   036-0357
426422891
MDR Report Key15392025
MDR Text Key305986210
Report Number9614641-2022-00283
Device Sequence Number1
Product Code PTS
UDI-Device Identifier04953170375040
UDI-Public04953170375040
Combination Product (y/n)N
Reporter Country CodeFR
PMA/PMN Number
CLASS1-EXMPT
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Other,Foreign,Health Professional,User Facility,Company Representative
Reporter Occupation Pharmacist
Type of Report Initial
Report Date 09/09/2022
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model NumberFG-51D
Device Lot Number84K
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer04/04/2022
Is the Reporter a Health Professional? Yes
Was the Report Sent to FDA? No
Initial Date Manufacturer Received 03/01/2022
Initial Date FDA Received09/09/2022
Was Device Evaluated by Manufacturer? Yes
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
-
-