MAUDE Adverse Event Report: DEPUY SPINE INC BALL POINT PEDICLE FEELER; PROBE

Catalog Number 274430000

Device Problems Break (1069); Material Deformation (2976)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 08/20/2022

Event Type  malfunction  

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.Complainant part is expected to be returned for manufacturer review/investigation but has yet to be received.The investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Event Description

Device report from synthes reports an event in (b)(6) as follows: it was reported that this was a posterior cervical fusion(c2) for dens fracture on (b)(6) 2022.The surgeon made a burr hole and tried to insert the pedicle screw into c2 with the pedicle feeler in question, but it was difficult.Finally, the pedicle feeler successfully entered the burr hole, and the screw was placed, but the pedicle feeler was bent.Then, the pedicle feeler broke when the nurse took it out of the surgical field and tried to fix it.No surgical delay was reported.Patient status/ outcome: stable no further information is available.Concomitant device reported: unk - screws: pedicle (part# unknown; lot# unknown; quantity: 1).This report is for one (1) ball point pedicle feeler.This is report 1 of 1 for complaint ball (b)(4).

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H3, h4, h6: the device was received, the investigation is in progress, no conclusion could be drawn at the time of filing this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: h3, h6: the product was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that ball point pedicle feele was bent and broken of probe.The broken piece was returned.A dimensional inspection was unable to be performed for the ball point pedicle feele due to post manufacturing damage.The observed condition of the device was consistent with a random component failure that may have been caused by exposure to unintended forces.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.The overall complaint was not confirmed as the ball point pedicle feele was found to have no damage or defects.No definitive root cause could be determined.There was no indication that a design or manufacturing issue contributed to the complaint.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: BALL POINT PEDICLE FEELER
• Type of Device: PROBE
• Manufacturer (Section D): DEPUY SPINE INC; 325 paramount drive; raynham MA 02767
• Manufacturer Contact: kate karberg ; 325 paramount drive; raynham, MA 02767 ; 3035526892
• MDR Report Key: 15411152
• MDR Text Key: 300227362
• Report Number: 1526439-2022-01580
• Device Sequence Number: 1
• Product Code: HXB
• UDI-Device Identifier: 10705034192031
• UDI-Public: (01)10705034192031
• Combination Product (y/n): N
• Reporter Country Code: JA
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 09/13/2022
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 274430000
• Device Lot Number: 0SA109248
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 11/15/2022
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 10/01/2011
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1
• Treatment: UNK - SCREWS: PEDICLE