MAUDE Adverse Event Report: SYNTHES GMBH PSI SD800.440 PEEK IMPLANT; PLATE, CRANIOPLASTY, PREFORMED, NON-ALTERABLE

Catalog Number SD800.440

Device Problem Adverse Event Without Identified Device or Use Problem (2993)

Patient Problem Unspecified Infection (1930)

Event Date 09/20/2022

Event Type  Injury  

Event Description

Device report from synthes reports an event in south korea as follows: it was reported that the device was implanted on (b)(6) 2022.It was then explanted on september 20, 2022 due to infection at the surgical area.The patient had a history of previous infections.No further information is available.This report involves one psi sd800.440 peek implant.This is report 1 of 1 for (b)(4).

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.Device available for evaluation: complainant part is not expected to be returned for manufacturer review/investigation.Initial reporter occupation: reporter is a j&j employee.The investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.A manufacturing record evaluation was performed for the not sterile finished lot number, and no non-conformances were identified.Product code#: sd800.440, lot #: 1343p83, manufacturing site: mezzovico, release to warehouse date: 04 aug 2022.Product was not returned.Based on the information available, it has been determined that no corrective and preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.If information is obtained that was not available for this medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: PSI SD800.440 PEEK IMPLANT
• Type of Device: PLATE, CRANIOPLASTY, PREFORMED, NON-ALTERABLE
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): WERK MEZZOVICO (CH); via cavazz 5; mezzovico 6805 ; SZ 6805
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 15553385
• MDR Text Key: 301284732
• Report Number: 8030965-2022-07951
• Device Sequence Number: 1
• Product Code: GXN
• Combination Product (y/n): N
• Reporter Country Code: KS
• PMA/PMN Number: K053199
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 10/06/2022
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Device Operator: Health Professional
• Device Catalogue Number: SD800.440
• Device Lot Number: 1343P83
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 11/02/2022
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 08/04/2022
• Is the Device Single Use?: Yes
• Type of Device Usage: Unknown
• Patient Sequence Number: 1
• Patient Outcome(s): Required Intervention