MAUDE Adverse Event Report: SYNTHES GMBH COUPL-SCR F/SYNFIX EVOL AIM DEV; INTERVERTEBRAL FUSION DEVICE WITH INTEGRATED FIXATION, LUMBAR

Catalog Number 03.835.006

Device Problem Compatibility Problem (2960)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 09/21/2022

Event Type  malfunction  

Event Description

Device report from synthes reports an event in (b)(6) as follows: it was reported on (b)(6) 2022, that the screw does not fit well, the tip does not come out to grab the implant.This report is for one (1) coupl-scr f/synfix evol aim dev this is report 1 of 2 for complaint (b)(4).

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Complainant part is expected to be returned for manufacturer review/investigation but has yet to be received.Reporter is a j&j employee.Without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.The photo was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device from attachment source file - reporte revisión.Visual analysis of the photo revealed that there was no damage or defects with the coupl-scr f/synfix evol aim dev.There is not enough evidence in the photo to confirm the allegation.As the device was not returned, an as-received condition could not be assessed, and a dimensional inspection and document/specification review were not completed.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.The overall complaint was not confirmed as the coupl-scr f/synfix evol aim dev was found to have no damage or defects.No definitive root cause could be determined.There was no indication that a design or manufacturing issue contributed to the complaint.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10: additional narrative: d4, d9, h3, h6: the device was received, the investigation could not be completed, and no conclusion could be drawn, as product is entering the complaint system.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.A manufacturing record evaluation was performed for the finished article lot and no non-conformances were identified.Part: 03.835.006.Lot: 4l06200.Release to warehouse date: 18.Apr.2019.Expiration date: na.Supplier: na.Manufacturing site: werk hagendrof.The product was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that the coupl-scr f/synfix evol aim dev was found the threads stripped.This can be relates with the unable to assemble complaint.No other defect was found.A dimensional inspection for the coupl-scr f/synfix evol aim dev was unable to be performed due to post manufacturing damage.The observed condition of the device was consistent with a random component failure that may have been caused by exposure to unintended forces.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.The overall complaint was confirmed as the observed condition of the coupl-scr f/synfix evol aim dev would contribute to the complained device issue.There is no indication that a design or manufacturing issue has caused the complaint condition and hence the root cause cannot be determined.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.If information is obtained that was not available for this medwatch, a follow-up medwatch will be filed as appropriate.G1: manufacturing site name & address corrected.

• Brand Name: COUPL-SCR F/SYNFIX EVOL AIM DEV
• Type of Device: INTERVERTEBRAL FUSION DEVICE WITH INTEGRATED FIXATION, LUMBAR
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): WERK HÄGENDORF (CH); im bifang 6; haegendorf CO 4614 ; SZ 4614
• Manufacturer Contact: kate karberg ; eimattstrasse 3; oberdorf ; SZ ; 3035526892
• MDR Report Key: 15580517
• MDR Text Key: 307154931
• Report Number: 8030965-2022-08038
• Device Sequence Number: 1
• Product Code: OVD
• UDI-Device Identifier: 07611819682665
• UDI-Public: (01)07611819682665
• Combination Product (y/n): N
• Reporter Country Code: CO
• PMA/PMN Number: K150673
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Company Representative
• Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 03.835.006
• Device Lot Number: 4L06200
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Initial Date Manufacturer Received: 09/21/2022
• Initial Date FDA Received: 10/11/2022
• Supplement Dates Manufacturer Received: 10/12/2022; 12/20/2022; 04/05/2023
• Supplement Dates FDA Received: 11/02/2022; 01/12/2023; 04/21/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 04/18/2019
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1
• Treatment: UNK - SCREWS: SYNFIX