• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: STRYKER NEUROVASCULAR CORK UNKNOWN_NEUROVASCULAR_PRODUCT; STENT, INTRACRANIAL NEUROVASCULAR

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

STRYKER NEUROVASCULAR CORK UNKNOWN_NEUROVASCULAR_PRODUCT; STENT, INTRACRANIAL NEUROVASCULAR Back to Search Results
Catalog Number UNK_NEU
Device Problems Entrapment of Device (1212); Migration (4003)
Patient Problem No Clinical Signs, Symptoms or Conditions (4582)
Event Date 09/27/2022
Event Type  malfunction  
Event Description
It was reported that during an endovascular procedure in a patient, when the physician tried to retrieve the stent delivery wire after deployment of the subject stent, the stent delivery wire caught on the subject stent creating a force that pulled the stent proximally.The delivery wire felt stuck and unable to retrieve into the microcatheter.The distal stent tines stayed in place but the proximal stent tines seemed to migrate proximally a little during retrieval of the delivery wire.The physician was ultimately able to get the delivery wire free.This caused a surgical delay of 5 min.The procedure was completed successfully.No clinical consequences were reported to the patient either due to this event or due to the surgical delay.
 
Event Description
It was reported that during an endovascular procedure in a patient, when the physician tried to retrieve the stent delivery wire after deployment of the subject stent, the stent delivery wire caught on the subject stent creating a force that pulled the stent proximally.The delivery wire felt stuck and unable to retrieve into the microcatheter.The distal stent tines stayed in place but the proximal stent tines seemed to migrate proximally a little during retrieval of the delivery wire.The physician was ultimately able to get the delivery wire free.This caused a surgical delay of 5 min.The procedure was completed successfully.No clinical consequences were reported to the patient either due to this event or due to the surgical delay.
 
Manufacturer Narrative
Although the lot number was not provided, the automated manufacturing execution system (mes) has controls in the manufacturing process to ensure the product met specifications upon release.During visual inspection, the stent delivery wire (sdw was seen to be kinked in several areas.The stent and introducer sheath were not returned (stent successfully deployed during the procedure).Functional inspection was not carried out as the stent was not returned.The reported event is covered in the device directions for use (dfu).As well, the risk of the reported event is documented in the risk documentation and there are current controls to mitigate the risk of the as reported event.The reported event could not be confirmed; however, the analysis results are consistent with the reported event.The device did not meet specifications when received for complaint investigation based on functional and visual inspection.It was reported that subject stent snagged after deployed.Additional information states that the patients anatomy was moderately tortuous, the physician feels that the anatomy and/or location of intended area of treatment may possibly have contributed to the reported event.The sdw was returned and noted to be kinked, the stent was not returned as it had been deployed.It is probable that the sdw was kinked during use causing it to become entangled in the stent during the attempt to remove the sdw.An assignable cause of procedural factors will be assigned to the reported sdw stuck in stent and stent dislodged/migrated, and to the analyzed sdw kinked/bent, as the issue is associated with a product that meets stryker design and manufacture specifications and was used in according with the dfu but due to procedural and/or anatomical factors during use, the product performance was limited.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
UNKNOWN_NEUROVASCULAR_PRODUCT
Type of Device
STENT, INTRACRANIAL NEUROVASCULAR
Manufacturer (Section D)
STRYKER NEUROVASCULAR CORK
ida industrial estate
model farm road
cork NA
EI  NA
Manufacturer (Section G)
STRYKER NEUROVASCULAR CORK
ida industrial estate
model farm road
cork NA
EI   NA
Manufacturer Contact
tara lopez
47900 bayside parkway
fremont, CA 94538
5104132500
MDR Report Key15801969
MDR Text Key307595556
Report Number3008881809-2022-00575
Device Sequence Number1
Product Code NJE
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
P180031
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Health Professional
Reporter Occupation Physician
Type of Report Initial,Followup
Report Date 12/22/2022
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Catalogue NumberUNK_NEU
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer10/12/2022
Is the Reporter a Health Professional? Yes
Initial Date Manufacturer Received 10/26/2022
Initial Date FDA Received11/15/2022
Supplement Dates Manufacturer Received12/21/2022
Supplement Dates FDA Received12/22/2022
Was Device Evaluated by Manufacturer? Yes
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Treatment
BALLAST LONG SHEATH (UNKNOWN); SL-10 MICROCATHETER (STRYKER); SOFIA INTERMEDIATE CATHETER (MICROVENTION)
Patient Age71 YR
Patient SexMale
-
-