MAUDE Adverse Event Report: SMITH & NEPHEW, INC. JOURNEY DCF AP FEM CUT BLK 6; PROSTHESIS, KNEE, FEMOROTIBIAL, SEMI-CONSTRAINED, CEMENTED, METAL/POLYMER

Model Number 74012416

Device Problem Detachment of Device or Device Component (2907)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 11/15/2022

Event Type  malfunction  

Manufacturer Narrative

Internal complaint reference: (b)(4).

Event Description

It was reported that during a tka, the screw came out the back of one journey dcf ap fem cut blk 6 and can't use it now.The procedure was resumed, without any delay, using a s+n back-up device.Patient was not injured as consequence of this problem.

Manufacturer Narrative

The associated device was returned and evaluated.A visual inspection of the returned device reveals the spiked cross bar and cross bar screw, came apart from the device, rendering the device inoperable.The cross bar screw and spiked cross bar were not returned.The device shows signs of significant wear and use.The reported event could be confirmed.A review of complaint history revealed similar events for the listed device over the previous 12 months, but no similar events for the batch based on the historical data, this failure mode will be monitored for future complaints for any necessary corrective actions.A review of the manufacturing records did not reveal a manufacturing abnormality that could have caused or contributed to the reported incident.At this time, we do not have reason to suspect that the product failed to meet any product specifications at the time of manufacture.A review of the risk management file revealed this failure mode was previously identified.The anticipated risk level is still adequate.Assessment of historical escalated cases concluded that there are no prior actions related to this device and failure mode.As the device was missing a component and it could not fit its purpose, the contribution of the device to the reported event could be corroborated.This device is a reusable instrument that can be exposed to numerous surgeries.Misassembling after reprocessing or rough handling are potential factors that may have contributed to the reported event.Additionally we recommend that all reusable instruments be routinely inspected for wear and damage and replaced as necessary.Based on this investigation, the need for corrective action is not indicated.Should additional information be received, the complaint will be reopened.No further investigation is warranted for this complaint; however, we will continue to monitor future complaints and investigate as necessary.We consider this investigation closed.

• Brand Name: JOURNEY DCF AP FEM CUT BLK 6
• Type of Device: PROSTHESIS, KNEE, FEMOROTIBIAL, SEMI-CONSTRAINED, CEMENTED, METAL/POLYMER
• Manufacturer (Section D): SMITH & NEPHEW, INC.; 1450 brooks rd.; memphis TN 38116
• Manufacturer (Section G): SMITH & NEPHEW, INC.; 1450 brooks rd.; memphis TN 38116
• Manufacturer Contact: holly topping ; 7000 west william cannon drive; austin, TX 78735 ; 5123913905
• MDR Report Key: 15948627
• MDR Text Key: 307185620
• Report Number: 1020279-2022-04919
• Device Sequence Number: 1
• Product Code: HRY
• UDI-Device Identifier: 03596010556684
• UDI-Public: 03596010556684
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K121393
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date: 12/29/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 12/09/2022
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 74012416
• Device Catalogue Number: 74012416
• Device Lot Number: 18CM08833
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 11/17/2022
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 12/27/2022
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 03/12/2018
• Is the Device Single Use?: No
• Type of Device Usage: Reuse
• Patient Sequence Number: 1