• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: FISHER & PAYKEL HEALTHCARE LIMITED ADULT HEATED WALL REUSABLE BREATHING CIRCUIT; BTT

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

FISHER & PAYKEL HEALTHCARE LIMITED ADULT HEATED WALL REUSABLE BREATHING CIRCUIT; BTT Back to Search Results
Model Number 900MR810
Device Problem Break (1069)
Patient Problem No Clinical Signs, Symptoms or Conditions (4582)
Event Type  malfunction  
Event Description
A healthcare facility in taiwan reported, via a fisher & paykel healthcare (f&p) field representative, that fifteen 900mr810 adult heated wall reusable breathing circuit's were damaged.There was no patient involvement as the issue was found whilst the circuit was not in use on a patient.
 
Manufacturer Narrative
(b)(4).Fisher & paykel healthcare (f&p) is in the process of completing our investigation.We will provide a follow-up report upon completion of our investigation.
 
Manufacturer Narrative
(b)(4).Method: the complaint 900mr810 adult heated wall reusable breathing circuit's were received at fisher & paykel healthcare (f&p) new zealand, where they were visually inspected and fault replication was attempted.Results: visual inspection of the complaint circuits confirmed that helix delamination had occurred near the chamber end cuff.Two of the fifteen circuits also had helix delamination near the patient end cuff.Two tests were run to attempt to replicate the helix delamination.First, a temperature test was run to determine if the use of pasteurization to clean the circuits could have caused the reported damage.A sample 900mr810 adult heated wall reusable breathing circuit was soaked in water at 90°c overnight to simulate pasteurization.This test did not replicate the reported event.Second, two 900mr810 adult heated wall reusable breathing circuit samples were intentionally pulled and twisted to simulate harsh handling.This test did not replicate the reported event.Conclusion: we are unable to determine the cause of the reported event.However, it is most likely caused by physical damage due to impact during transportation of the device.All 900mr810 adult heated wall reusable breathing circuits are visually inspected and pressure tested prior to being released for distribution.Any circuits that fail are rejected.This suggests the reported damaged occurred after the subject breathing circuit was released for distribution.The user instructions that accompany the 900mr810 adult heated wall reusable breathing circuit state the following: inspect circuit before re-use, do not use if the circuit shows signs of deterioration, such as cracks, tears, or damage"."perform a pressure and leak test on the breathing system, and check for occlusions, before connecting to a patient"."do not cover the circuit with materials such as blankets, towels or bed linen"."disconnect tube by handling end connectors only, do not pull or twist tubing, as this may cause damage".
 
Event Description
A healthcare facility in taiwan reported, via a fisher & paykel healthcare (f&p) field representative, that fifteen 900mr810 adult heated wall reusable breathing circuit's were damaged.There was no patient involvement as the issue was found whilst the circuit was not in use on a patient.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
ADULT HEATED WALL REUSABLE BREATHING CIRCUIT
Type of Device
BTT
Manufacturer (Section D)
FISHER & PAYKEL HEALTHCARE LIMITED
15 maurice paykel place
east tamaki
auckland, 2013
NZ  2013
Manufacturer (Section G)
FISHER & PAYKEL HEALTHCARE LIMITED
15 maurice paykel place
east tamaki
auckland, 2013
NZ   2013
Manufacturer Contact
faranak gomarooni
17400 laguna canyon road
suite 300
irvine, CA 92618-2216
9494534000
MDR Report Key15965601
MDR Text Key305457515
Report Number9611451-2022-01155
Device Sequence Number1
Product Code BTT
UDI-Device Identifier09420012432247
UDI-Public(01)09420012432247(10)2102033904(11)220214
Combination Product (y/n)N
Reporter Country CodeTW
PMA/PMN Number
K131957
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Foreign,User Facility,Company Representative
Reporter Occupation Other
Type of Report Initial,Followup
Report Date 11/18/2022
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model Number900MR810
Device Catalogue Number900MR810
Device Lot Number2102033904
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer12/05/2022
Is the Reporter a Health Professional? No
Initial Date Manufacturer Received 11/18/2022
Initial Date FDA Received12/13/2022
Supplement Dates Manufacturer Received04/05/2023
Supplement Dates FDA Received05/02/2023
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured02/14/2022
Is the Device Single Use? No
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Reuse
Patient Sequence Number1
-
-