TERUMO CORPORATION, ASHITAKA CAPIOX HOLLOW FIBER OXYGENATOR/ARTERIAL FILTER; OXYGENATOR, CARDIOPULMONARY BYPASS
|
Back to Search Results |
|
Model Number N/A |
Device Problems
Leak/Splash (1354); Increase in Pressure (1491)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 11/17/2022 |
Event Type
Injury
|
Manufacturer Narrative
|
Patient identifier: requested, not provided.Age & date of birth: requested, not provided.Patient sex: requested, not provided.Weight: requested, not provided.Ethnicity: requested, not provided.Race: requested, not provided.Implanted date: device was not implanted.Explanted date: device was not explanted.Contact: requested, not provided.Telephone number: requested, not provided.Health professional: requested, unknown.Occupation: requested, unknown.Pma/510(k): k071572, k130280.The actual device has been returned for evaluation.The investigation is currently ongoing.A follow-up report will be submitted once the investigation is complete.Review of the manufacturing record and the shipping inspection record of the actual product, no anomaly was found.Past complaint file, no other similar reports were found with the product of the involved product code/lot#.(b)(4).
|
|
Event Description
|
The user facility reported that the capiox oxygenator port was leaking.Dripping leakage at the gas outlet was detected during priming.The oxygenator was exchanged with an identical oxygenator.The procedure outcome was not reported.The patient was not harmed.The product malfunctioned due to leakage.This is considered serious as the product was replaced.
|
|
Manufacturer Narrative
|
This report is being submitted as follow-up no.1 to provide a correction to the sample receipt date in section d9, update section h3, and to provide the completed investigation results.H6: investigation findings - 114 is based upon the evaluation of user facility information; 213 is based upon functional testing of the returned sample.H6 - investigation conclusion - 4310 is based upon evaluation of the user facility information; 67 is based upon functional testing of the returned sample.Investigation of the actual sample.Visual inspection of the actual sample: no anomaly such as a brakeage was found.Leak test of the actual sample: the actual sample was installed into a circuit consisting of tubes, and saline solution was circulated with a flow rate of 1.5 l/min.No leakage was found.After the blood channel was filled with colored saline solution, the blood outlet side was clamped, and pressure of 2 kgf/cm2 was applied from the blood inlet side into the blood channel.No leakage was found.The water channel was filled with colored water, the water outlet side was clamped, and pressure of 3 kgf/cm2 was applied from the water inlet side into the water channel.No leakage was found.Record review.The manufacturing record and the shipping inspection record of the actual sample: no anomaly was found.Past complaint file: no other similar report of the product with the involved product code/lot# was found.Based on the investigation result, no anomaly that led to the leakage was found in the actual sample.As a possible cause of occurrence, following factors were inferred.However, since no leakage was found in the returned sample, and it was unable to simulate the reported issue, the cause of occurrence could not be clarified.It was leaked from the connection between the oxygenator port and the tube.Water drops dripped due to condensation on the gas outlet side.Ifu states: "do not use an oxygenator and reservoir that leaks.Replace it with another capiox fx05 oxygenator and reservoir.(b.Priming procedure warnings) band all connections in the circuit.(a.Set-up)" terumo medical products (tmp) (importer) registration no.2243441 is submitting this report on behalf of ashitaka factory of terumo corporation (manufacturer) registration no.9681834.
|
|
Search Alerts/Recalls
|
|
|