|
Model Number G23162 |
Device Problem
Break (1069)
|
Patient Problem
Foreign Body In Patient (2687)
|
Event Date 12/13/2022 |
Event Type
Injury
|
Event Description
|
As reported, during an interventional procedure involving an arterial lesion in the leg, the tip of a cxi support catheter separated.While attempting to cross the arterial lesion with the device, the tip separated and was seen radiographically.The separated fragment was successfully retrieved with a snare.According to the initial reporter, the patient did not experience any adverse effects due to this occurrence.Additional information has been requested.
|
|
Manufacturer Narrative
|
This report includes information known at this time.A follow-up report will be submitted should additional relevant information become available.This report is required by the fda under 21 cfr part 803 and is based on unconfirmed information submitted by others.Neither the submission of this report nor any statement contained herein is intended to be an admission that any cook device is defective or malfunctioned, that a death or serious injury occurred, nor that any cook device caused, contributed to, or is likely to cause or contribute to a death or serious injury if a malfunction occurred.
|
|
Event Description
|
Additional information was received 29dec2022 and 06jan2023.Access was obtained in the right common femoral artery.Mild-to-moderate diffuse calcium was noted throughout the anatomy, and resistance was encountered upon insertion of the catheter.While attempting to cross the target lesion in the left tibial artery, the tip separated as resistance was encountered.A power injector was not used with the device.
|
|
Manufacturer Narrative
|
Blank fields on this form indicate the information is unknown, unavailable, or unchanged.H3: device evaluated by mfg = other (81) - device evaluation has begun; however, a conclusion is not yet available.This report includes information known at this time.A follow-up report will be submitted should additional relevant information become available.This report is required by the fda under 21 cfr part 803 and is based on unconfirmed information submitted by others.Neither the submission of this report nor any statement contained herein is intended to be an admission that any cook device is defective or malfunctioned, that a death or serious injury occurred, nor that any cook device caused, contributed to, or is likely to cause or contribute to a death or serious injury if a malfunction occurred.
|
|
Event Description
|
No additional information regarding the patient and/or event has been received since the previous medwatch report was sent.
|
|
Manufacturer Narrative
|
Blank fields on this form indicate the information is unknown, unavailable, or unchanged.Summary of event: as reported, during an interventional procedure involving an arterial lesion in the leg, the tip of a cxi support catheter separated.While attempting to cross the arterial lesion with the device, the tip separated and was seen radiographically.The separated fragment was successfully retrieved with a snare.According to the initial reporter, the patient did not experience any adverse effects due to this occurrence.Additional information was received (b)(6) 2022 and (b)(6) 2023.Access was obtained in the right common femoral artery.Mild-to-moderate diffuse calcium was noted throughout the anatomy, and resistance was encountered upon insertion of the catheter.While attempting to cross the target lesion in the left tibial artery, the tip separated as resistance was encountered.A power injector was not used with the device.Investigation evaluation: reviews of the complaint history, device history record, drawing, instructions for use (ifu), manufacturing instructions, and quality control procedures were conducted during the investigation.A visual inspection of the complaint device was also conducted.The complaint device and a set of forceps were returned to cook for investigation.The separated portion of the catheter tip was not returned.The distal end of the separated catheter was damaged, with fraying and exposure of the stainless braiding noted.The device evaluation found the tip breakage to be consistent with a cxi tip bond separation; therefore, cook concluded that the device was manufactured out of specification.A document-based investigation evaluation was performed.There have been no additional complaints associated with this lot number.One related non-conformance was noted on a sub-assembly lot; however, all affected product was scrapped and there are 100% inspections in place to capture the non-conformance.The product ifu states "the catheter should not be advanced through an area of resistance unless the source of the resistance is identified by fluoroscopy and appropriate steps are taken to reduce or remove the obstruction.¿ a review of relevant manufacturing and quality control documents was conducted.Cook has concluded that sufficient inspection activities are in place to identify this failure mode prior to distribution.Although one relevant non-conformance was noted on a sub-assembly lot, all non-conforming product was scrapped, there are 100% inspections in place to capture this non-conformance, adequate inspection activities have been established, there is objective evidence that the dhr was fully executed, and no other lot-related complaints have been received from the field.Therefore, it was concluded that there is no evidence that additional non-conforming product exists in house or in the field.Based on the information provided and the results of the investigation, cook has concluded that although resistance was encountered during advancement of the device, a manufacturing deficiency contributed to this event, as the device evaluation noted damage consistent with a cxi tip bond separation.The risk analysis for this failure mode was reviewed and no additional escalation is required.The appropriate personnel have been notified and cook will continue to monitor for similar events.This report is required by the fda under 21 cfr part 803 and is based on unconfirmed information submitted by others.Neither the submission of this report nor any statement contained herein is intended to be an admission that any cook device is defective or malfunctioned, that a death or serious injury occurred, nor that any cook device caused, contributed to, or is likely to cause or contribute to a death or serious injury if a malfunction occurred.
|
|
Search Alerts/Recalls
|
|
|