• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: CONVATEC INC ESTEEM+; POUCH, COLOSTOMY

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

CONVATEC INC ESTEEM+; POUCH, COLOSTOMY Back to Search Results
Model Number 421617
Device Problem Malposition of Device (2616)
Patient Problem No Clinical Signs, Symptoms or Conditions (4582)
Event Type  malfunction  
Event Description
It was reported that starter hole of ten wafers was off centered.The product was not used.No photo is available at this time.
 
Manufacturer Narrative
Device 6 of 10.Common device name: pouch, colostomy.(b)(6).Based on the available information, this event is deemed to be a reportable malfunction.To date no additional information has been received.Should additional information become available, a follow-up report will be submitted.(b)(4).
 
Manufacturer Narrative
C22 and d17 were selected under imdrf investigation findings and imdrf cause conclusions respectively since there is no code to describe the term "allowed deviation/tolerances for cutting guides".A batch record review indicates no discrepancies.A slightly offset hole can have the following cause: the cutting guides are not 100% evenly positioned on the carrier , according to raw material is -+ 1 mm deviation is allowed & in our technical drawings are also cutting specifications of the wafer+- 1 mm allowed, if both the position of the cutting guide on the carrier and cutting process on the machine move within allowed tolerances by +-1 mm, this could result in a total of +-2 mm deviation.Registration of the complaint and the analysis of the case: the defect shown in the picture shows us that the 30 mm hole is present and any large cut-out was secured to the maximum, so we classify the complaint as uncritical, because the patient can use the wafer from 30 mm to 43 mm.Corrective action(s) - no corrective action required, the defect on the bag cannot be corrected because is single-use product and besides does not need the correction because in all large the cuttability is guaranteed.Sensitization of the employees if the hole on the wafer does not move approved tolerance range to sort out the bags/wafer.Supplier investigation report attached to child investigation record.The investigation associated with related event record has been approved and was complete.No additional action is required, and this complaint will be closed.This issue will be monitored through the post market product monitoring review process.To date no additional information has been received.Should additional information become available, a follow-up report will be submitted.Fda registration number: reporting site: 1049092.Third party manufacturing site (for life): 3003759552.
 
Event Description
To date no additional patient or event details have been received.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
ESTEEM+
Type of Device
POUCH, COLOSTOMY
Manufacturer (Section D)
CONVATEC INC
211 american avenue
greensboro NC
Manufacturer (Section G)
CONVATEC INC
211 american avenue
greensboro NC
Manufacturer Contact
pamela meadows
7815 national service road
suite 600
greensboro, NC 
3365424679
MDR Report Key16181840
MDR Text Key308754916
Report Number1049092-2023-00008
Device Sequence Number1
Product Code EZQ
UDI-Device Identifier00768455197460
UDI-Public00768455197460
Combination Product (y/n)N
PMA/PMN Number
EXEMPT
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Foreign,Distributor
Reporter Occupation Non-Healthcare Professional
Type of Report Initial,Followup
Report Date 12/23/2022
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Other
Device Model Number421617
Device Lot Number0000669835
Was Device Available for Evaluation? No
Was the Report Sent to FDA? Yes
Initial Date Manufacturer Received 12/23/2022
Initial Date FDA Received01/17/2023
Supplement Dates Manufacturer Received06/15/2023
Supplement Dates FDA Received07/07/2023
Was Device Evaluated by Manufacturer? No
Date Device Manufactured05/01/2022
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Unknown
Patient Sequence Number1
-
-