ETHICON ENDO-SURGERY, LLC. ENSEAL X1 CURVED 37CM SHAFT; ELECTROSURGICAL CUTTING & COAGULATION & ACCESSORIES
|
Back to Search Results |
|
Model Number NSLX137C |
Device Problems
Detachment of Device or Device Component (2907); Material Integrity Problem (2978)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 12/01/2022 |
Event Type
malfunction
|
Manufacturer Narrative
|
(b)(4).Batch #: unknown.Additional information was requested and the following was obtained: did the electrode ceramic separate or break off? no.Did the i blade get damaged or break off? no.Is the jaw damaged but not broken off? no.Is the top jaw loose but not detached? yes.Is the top jaw ptc material damaged? yes.Is the black ptc in the upper jaw detached? yes.Is the top jaw broken off the of the device? yes.Attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.The lot/batch was not provided; therefore, the manufacturing records evaluation could not be performed.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
Event Description
|
It was reported that during an unknown procedure the product was broken from the avil head during first use.The use of the product could not be continued.There were no patient consequences.
|
|
Manufacturer Narrative
|
(b)(4).Date sent: 6/9/2023.D4 batch #: x94f3m.Investigation summary: the product was returned for evaluation.Visual inspection and functional testing were conducted on the returned device.Visual analysis of the returned sample revealed that the device was returned with the distal guide weld broken.There were no top jaw missing as reported.The device was tested on the generator and passed all functional testing.The energy output delivered from the device was verified.All tones were heard during functional testing.The damage to the distal guide was not enough to prevent the jaws to open and close as expected.A manufacturing record evaluation was performed for the finished device lot/batch number, and no non-conformances related to the reported complaint condition were identified.As part of the quality process, all devices are manufactured, inspected, and released to approved specifications.No conclusion could be reached on the cause of the reported event.Please refer to the ifu for proper handling of the device, note that ¿caution: do not grasp tissue beyond the electrode surface, in the hinge of the jaws.Do not overfill the jaws of the instrument with tissue.This could result in difficulty opening the jaws, partially cutting tissue, and unintended injury.
|
|
Search Alerts/Recalls
|
|
|