• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: MICRO THERAPEUTICS, INC. DBA EV3 MARATHON; CATHETER, CONTINUOUS FLUSH

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

MICRO THERAPEUTICS, INC. DBA EV3 MARATHON; CATHETER, CONTINUOUS FLUSH Back to Search Results
Model Number 105-5056
Device Problems Collapse (1099); Material Deformation (2976)
Patient Problem No Clinical Signs, Symptoms or Conditions (4582)
Event Date 01/03/2023
Event Type  malfunction  
Manufacturer Narrative
Product analysis of 105-5056, lot# b455251 ¿ damage location details: onyx residue was found within the marathon hub.No damages were found with the marathon distal marker/tip.The marathon distal tip and lumen was found to be occluded with solidified onyx residue.The entire surface of the marathon catheter body was examined under magnification.The marathon catheter body was found to be ruptured at ~6.8cm from the distal tip.¿ testing/analysis: the marathon total length was measured to be ~171.0cm, the usable length was measured to be ~166.0m which is within specification and the distal floppy length was measured to be ~26.0cm which is within specification.The marathon micro catheter was pressurized with water and found non-patent as it was found to be occluded with the onyx.¿ conclusion: based on the device analysis and reported information, the customer complaint was confirmed as the returned marathon was found ruptured.The rupture appears to have occurred as a result of over-pressurization.Rupture can occur during injection of embolic material or when the distal portion of the catheter is kinked, prolapsed, or occluded.Rupture can also occur due to high injection rate, use of palm of hand pressure, increased injection force against resistance or pauses longer than two minutes.The review of lot history records shows that the finished device has met all manufacturing requirements and specifications during final assembly and quality inspection.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
 
Event Description
Medtronic received a report regarding a marathon catheter being crushed/kinked/damaged.The patient was undergoing an aneurysm malformation embolization treatment.The accessed vessel was the femoral artery.The vessel d diameter is unknown.It was noted the patient's vessel tortuosity was normal.It was reported that the micro-guide wire guided the catheter in place, and when the lesion was embolized, it was found that onyx did not diffuse at the outlet of the micro-catheter, and the micro-catheter was withdrawn, and a distal broken place was found.It was reported the catheter was crushed/kinked/damaged at the distal segment.The reported device and any accessory devices were prepared as indicated in the instructions for use (ifu).The catheter was flushed as indicated in the ifu.No patient symptoms or further complications were reported as a result of this event.Ancillary devices include onyx.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
MARATHON
Type of Device
CATHETER, CONTINUOUS FLUSH
Manufacturer (Section D)
MICRO THERAPEUTICS, INC. DBA EV3
9775 toledo way
irvine CA 92618
Manufacturer (Section G)
MICRO THERAPEUTICS, INC. DBA EV3
9775 toledo way
irvine CA 92618
Manufacturer Contact
glen belmer
9775 toledo way
irvine, CA 92618
6122713209
MDR Report Key16583275
MDR Text Key312013979
Report Number2029214-2023-00513
Device Sequence Number1
Product Code KRA
UDI-Device Identifier00847536005914
UDI-Public00847536005914
Combination Product (y/n)N
Reporter Country CodeCH
PMA/PMN Number
K093750
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Foreign,Health Professional,Company Representative
Reporter Occupation Physician
Type of Report Initial
Report Date 03/21/2023
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model Number105-5056
Device Catalogue Number105-5056
Device Lot NumberB455251
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer02/01/2023
Is the Reporter a Health Professional? Yes
Initial Date Manufacturer Received 02/24/2023
Initial Date FDA Received03/21/2023
Date Device Manufactured10/01/2022
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Patient Sequence Number1
-
-