MAUDE Adverse Event Report: ANGIOMED GMBH & CO. MEDIZINTECHNIK KG FLUENCY PLUS VASCULAR STENT GRAFT

Catalog Number FVL10100

Device Problems Positioning Failure (1158); Misfire (2532)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 01/24/2023

Event Type  malfunction  

Event Description

It was reported that during a stent placement procedure, the stent allegedly failed to deploy.The procedure was completed using another device.There was no reported patient injury.

Manufacturer Narrative

The catalog number identified has not been cleared in the us but is similar to the fluency plus endovascular stent graft products that are cleared in the us.The pro code and 510 k number for the fluency plus endovascular stent graft products are identified in d2 and g4.Manufacturing review: the lot history records of this lot were reviewed with special attention to the manufacturing and inspection of this product and the product was found to have met the specification prior to shipment.Based on the information available it is not reasonably suggested that a manufacturing process may have caused or contributed to the reported issue.Investigation summary: the stent delivery system was returned for evaluation and the stent was found partially deployed which leads to confirmed results for partial deployment.The target vessel in this case was an unspecified vein which is an off-label use.Based on the provided information and the evaluation of the returned sample, the investigation is confirmed for partial deployment.The intended placement of the device in the venous system represent off-label use.A definite root cause for the reported event could not be determined.Labeling review: in reviewing the relevant labeling, it was found that the instructions for use sufficiently address the potential risks.Regarding preparation of the device the instructions for use state that 'prior to loading the vascular system over a guide wire, both ports must be flushed with sterile saline (.).Flushing these lumens will also facilitate stent graft deployment.' regarding the anatomy of the placement site the instructions for use states: 'prior to stent graft deployment (.), ensure that the proximal stent graft end is positioned in a straight section of the lumen to reduce the risk of increased deployment forces and possible failure to deploy.' regarding accessories the instructions for use states: 'a super stiff guide wire (0.035 in.) is advanced from a femoral artery puncture site.Use an introducer sheath for the implant procedure'; the packaging pictograms indicate an introducer size of 9f and a 0.035" guidewire.Regarding indications for use, the instructions for use states: 'for use in the iliac and femoral arteries¿.(expiry date: 06/2025).

• Brand Name: FLUENCY PLUS VASCULAR STENT GRAFT
• Type of Device: VASCULAR STENT GRAFT
• Manufacturer (Section D): ANGIOMED GMBH & CO. MEDIZINTECHNIK KG; wachhausstr. 6; karlsruhe 76227 ; GM 76227
• Manufacturer (Section G): ANGIOMED GMBH & CO. MEDIZINTECHNIK KG; wachhausstr. 6; karlsruhe 76227 ; GM 76227
• Manufacturer Contact: brett curtice ; 800 w. rio salado pkwy; tempe, AZ 85281 ; 4803032689
• MDR Report Key: 16674515
• MDR Text Key: 312967806
• Report Number: 9681442-2023-00114
• Device Sequence Number: 1
• Product Code: PFV
• UDI-Device Identifier: 00801741145247
• UDI-Public: (01)00801741145247
• Combination Product (y/n): N
• Reporter Country Code: IN
• PMA/PMN Number: P130029
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Other,Foreign,Health Professional,User Facility,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial
• Report Date: 03/09/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: FVL10100
• Device Lot Number: ANGT1086
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 03/08/2023
• Is the Reporter a Health Professional?: Yes
• Initial Date Manufacturer Received: 03/08/2023
• Initial Date FDA Received: 04/04/2023
• Was Device Evaluated by Manufacturer?: Yes
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1