SMITH & NEPHEW, INC. R3 3 HOLE ACET SHELL 60MM; PROSTHESIS, HIP, SEMI-CONSTRAINED, UNCEMENTED, METAL/POLYMER, POROUS
|
Back to Search Results |
|
Model Number 71335560 |
Device Problem
Migration (4003)
|
Patient Problems
Fall (1848); Loss of Range of Motion (2032); Discomfort (2330); Osteolysis (2377); Inadequate Pain Relief (2388); Ambulation Difficulties (2544); Metal Related Pathology (4530)
|
Event Date 02/03/2017 |
Event Type
Injury
|
Event Description
|
It was reported that, after a r3-tha construct had been implanted on the patient¿s right hip on (b)(6) 2010.The patient has been experiencing severe right hip pain and limited ambulation with decreased range of motion.After this procedure, several right hip radiographs have been taken which reveal an overall stable appearance without significant changes, evidence of loosening or presence of fractures.A chromium and cobalt levels in blood test conducted on (b)(6) 2021, revealed concentrations below 3 ng/ml for both ions.In addition, on (b)(6) 2020, a frog leg anteroposterior radiograph of the right hip revealed superior medial migration of the acetabular component.To treat the ongoing right hip pain, the patient underwent a femoral and obturator nerve block procedure under fluoroscopic guidance on (b)(6) 2020.During this procedure, the articular branch of the femoral and obturator nerve was blocked with 1 ml of 0.25% bupivacaine, respectively.In addition, on (b)(6) 2021, the patient underwent a radiofrequency ablation of the articular branch of both nerves with the same diagnosis of persistent right hip pain.The patient current health status is unknown.
|
|
Manufacturer Narrative
|
H10: internal complaint reference (b)(4).
|
|
Manufacturer Narrative
|
Section h3, h6: given the nature of the alleged incident, the device could not be returned for evaluation; therefore, a device analysis could not be performed.However, based on the information provided, the unsatisfactory experience could be confirmed.The clinical/medical investigation concluded that, although the 2020 anteroposterior x-ray report notes medial migration of the acetabular cup and recent clinic notes indicate the prosthesis is needed to be secured to the bone, the clinical root cause cannot be concluded based on the information provided.It is unknown to what extent the impact the patient¿s history of chronic lower back problems/pain, multiple falls, past trauma and diagnosis of sciatica has on the reported events.Therefore, it cannot be ruled out as contributing factors to the reported events.It cannot be concluded that the reported symptoms were associated with a malperformance of the implant or implant failure.The patient impact beyond that which has been reported cannot be determined, but additional surgery is anticipated.A review of the production order did not reveal a manufacturing abnormality that could have caused or contributed to the reported incident.A review of complaint history for the part number over the past 36 months and for the batch number based on historical data of the device did not reveal similar events for the listed device.A review of the instructions for use documents for total hip systems revealed that implant migration was identified in the adverse events usually as a result of insufficient graft material, improper cement techniques, and/or varus stem alignment.A review of the risk management file revealed this failure mode was previously identified.The anticipated risk level is still adequate.A historical review concluded that there are no prior actions related to this product and event.At this time, we have no reason to suspect that the product failed to meet any specifications at the time of manufacture.Factors that could contribute to the reported event include abnormal loading of limb, patient anatomy and/or traumatic injury.Based on this investigation, the need for corrective action is not indicated.Should any additional information be received, the complaint will be reopened.No further investigation is warranted for this complaint; however, we will continue to monitor for future complaints and investigate as necessary.We consider this investigation closed.
|
|
Manufacturer Narrative
|
H3, h6.Given the nature of the alleged incident, the device could not be returned for evaluation; therefore, a device analysis could not be performed.The clinical/medical investigation concluded that, although the 2020 anteroposterior x-ray report notes medial migration of the acetabular cup, recent radiology does not confirm this as the component was documented to be in solid position without migration or movement in a clinic note dated (b)(6) 2022.It is unknown to what extent the patient¿s history of chronic lower back problems/pain, multiple falls, past trauma and diagnosis of sciatica had on the reported events.Based on the information provided, the clinical root cause cannot be confirmed.However, the patient¿s history of multiple falls and trauma cannot be ruled out as a contributing factor to the reported events.It cannot be concluded that the reported symptoms were associated with a malperformance of the implant.The patient impact beyond that which has been reported cannot be determined.A review of the production order did not reveal a manufacturing abnormality that could have caused or contributed to the reported incident.A review of complaint history for the part number over the past 36 months and for the batch number based on historical data of the device did not reveal similar events for the listed device.A review of the instructions for use documents for total hip systems revealed that implant migration was identified in the adverse events usually as a result of insufficient graft material, improper cement techniques, and/or varus stem alignment.A review of the risk management file revealed this failure mode was previously identified.The anticipated risk level is still adequate.A historical review concluded that there are no prior actions related to this product and event.At this time, we have no reason to suspect that the product failed to meet any specifications at the time of manufacture.Factors that could contribute to the reported event include abnormal loading of limb, patient anatomy and/or traumatic injury.Based on this investigation, the need for corrective action is not indicated.Should any additional information be received, the complaint will be reopened.No further investigation is warranted for this complaint; however, we will continue to monitor for future complaints and investigate as necessary.We consider this investigation closed.
|
|
Manufacturer Narrative
|
H3, h6.It was reported that after a total hip arthroplasty, the patient had a right hip revision surgery after severe right hip pain, walking and mobility issues, chromium and cobalt presence in the bloodstream, migration of the acetabular component.As of today, the explanted head, sleeve and liner, have not been returned for evaluation and.The shell and stem remain implanted and therefore cannot be tested.Therefore, a device evaluation could not be performed.A review of the historical complaints data for the devices concerned was performed using batch numbers, part numbers and the reported failure modes to evaluate patterns of repeated failures or defects.Similar complaints have been identified for the hemi head and the sleeve, but no similar complaints have been identified for the liner, shell and stem.This will continue to be monitored via routine trending, however the liner, hemi head and sleeve are no longer sold.In the absence of the actual devices, the production records were reviewed for the alleged devices.At this time, we have no reason to suspect that the product failed to meet any manufacturing specifications.A review of the instructions for use states that implant migration, metal sensitivity reactions, deformation of the articular surface and pain are identified as possible side effects accompanying a hip replacement implantation.A risk management review was performed.The alleged failure mode and associated risks have been anticipated within the risk file and the anticipated risk level is still adequate.No further actions are required at this time.A review of historic escalation actions related to the products and similar complaint events was performed.Prior applicable escalation actions were identified for the head, sleeve and liner were removed from the market due to commercial reasons and in abundance of caution to reduce the potential risk of fretting corrosion and accelerated release of metal debris at the taper junctions.There were no prior actions related to the shell and the stem.No further escalation actions are required.The provided medical information was reviewed.Based on the information provided, the unsatisfactory experience could be confirmed.The patient¿s diagnosis of ischiofemoral impingement syndrome, chronic lower back problems, multiple falls, and past trauma cannot be ruled out as contributing factors to the reported hip pain, walking and mobility issues.The reported pain, elevated metal ion levels, intraoperative findings of significant material wear and debris and pseudotumor are findings consistent with metallosis.However the root cause cannot be confirmed and it cannot be concluded that the reported clinical reactions were associated with a mal-performance of the implant.The patient impact beyond the pain, revision, and expected transient post-op convalescence period cannot be determined.Based on the information provided, a definitive root cause cannot be determined.Specific factors known to contribute to the alleged fault are excessive physical activity levels, unreasonable stress on replacement system, trauma to the joint replacement, abnormal loading of limb, patient anatomy and traumatic injury.Also loosening of components may increase production of wear particles and accelerate damage to the bone should the devices or additional information be received, the complaint will be reopened.Based on this investigation, the need for corrective and preventative actions is not indicated.
|
|
Manufacturer Narrative
|
H10.Additional information was added in b5.H11.Corrected information added in b1, b2, and h6 (health effect - clinical code and health effect - impact code).
|
|
Event Description
|
It was reported that, after a r3-tha construct had been implanted on the patient¿s right hip on (b)(6) 2010, the patient has been experiencing severe right hip pain and limited ambulation with decreased range of motion.After this procedure, several right hip radiographs have been taken which reveal an overall stable appearance without significant changes, evidence of loosening or presence of fractures.A chromium and cobalt levels in blood test conducted on (b)(6) 2021 revealed concentrations below 3 ng/ml for both ions.In addition, on (b)(6) 2020, a frog leg anteroposterior radiograph of the right hip revealed superior medial migration of the acetabular component.To treat the ongoing right hip pain, the patient underwent a femoral and obturator nerve block procedure under fluoroscopic guidance on (b)(6) 2020.During this procedure, the articular branch of the femoral and obturator nerve was blocked with 1 ml of 0.25% bupivacaine, respectively.In addition, on (b)(6) 2021, the patient underwent a radiofrequency ablation of the articular branch of both nerves with the same diagnosis of persistent right hip pain.On (b)(6) 2023, it was stated that the patient will undergo a right hip revision surgery on an unknown date due to pain, walking and mobility issues, which had been treated with pain medication.The patient underwent the aforementioned revision surgery on (b)(6) 2023.During the procedure, the head and liner were explanted and an intraarticular pseudotumor was resected.
|
|
Search Alerts/Recalls
|
|
|