Model Number IST-511 |
Device Problem
Defective Component (2292)
|
Patient Problem
Choking (2464)
|
Event Date 04/19/2023 |
Event Type
malfunction
|
Event Description
|
The customer reported while using the acceava strep a dipstick and swabbing the patient to test for the presence of strep a, the tip of the cotton swab fell off.The customer indicated the detached piece went down the patient's throat causing the patient to choke and expectorate swab tip and is stable.Additionally, the customer reportedly examined three additional cotton swabs from the reported kit, and four cotton swabs each from three additional kits from the same lot and noted the cotton tips from all examined swabs fell off after applying gentle pressure.
|
|
Manufacturer Narrative
|
Results pending completion of the investigation.
|
|
Event Description
|
The customer reported while using the acceava strep a dipstick and swabbing the patient to test for the presence of strep a, the tip of the cotton swab fell off.The customer indicated the detached piece went down the patient's throat causing the patient to choke and expectorate swab tip and is stable.Additionally, the customer reportedly examined three additional cotton swabs from the reported kit, and four cotton swabs each from three additional kits from the same lot and noted the cotton tips from all examined swabs fell off after applying gentle pressure.
|
|
Manufacturer Narrative
|
F2 - uf/importer report #: previously blank now na.H3 - device evaluated by mfg? previously "no" now "yes".H3 - evaluation summary attached: previously blank now "no".H3 - reason device not evaluated by mfg: now "na" as return testing completed.Investigation conclusion: retained devices and swabs from the reported lot number were visually examined and no damage was observed to the swab or cotton swab tip.The swabs were used to collect sample and negative results were obtained with strong control lines.Returned devices and swabs from the reported lot number were visually examined and no damaged was observed to the swab or cotton swab tips.The returned swabs were then physically examined by applying pressure to the swab and no swab breakage or applicator anomalies were observed.In-house testing did not replicate the reported issue of applicator breakage or cotton swab tips falling off.The case details were reviewed along with the complaint history for the reported issue and no indications of a systemic issue were identified.Manufacturing batch record review did not uncover any relevant non-conformances and found that the lot met quality control specifications.Review of the risk management report for this product found that the reported issue is within the risk profile for this device; no new hazard has been identified.A root cause could not be determined from the available information as the reported issue was not replicated during testing of retention product.Complaints are tracked and trended on a monthly basis.
|
|
Search Alerts/Recalls
|