MAUDE Adverse Event Report: MICROVENTION, INC. WEB SL 17; INTRASACCULAR DEVICES

Model Number W5-4.5-2-MVI

Device Problem Separation Failure (2547)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 05/09/2023

Event Type  malfunction  

Event Description

It was reported that a web sl was used for a acom aneurysm with sah bleeding.A pre-check of connectivity with a wdc-2 device was successful.The web device was deployed in the aneurysm and did not detach with multiple attempts.The microcatheter was used as manipulation during detachment of the web device resulting in detachment.However, the web was not a satisfactory detachment because of the movement of the web during the manipulation to detach.No patient harm or injury was reported.

Manufacturer Narrative

Visual analysis: a visual inspection of the device captured in this file could not be performed as a physical device was not returned for evaluation, nor were any images of the device provided in place of a device return.Procedure and medical imaging was not provided for this investigation.Investigation findings: without the return and physical evaluation of the device, the investigation cannot definitively determine if a condition existed that would have caused or contributed to the reported event.Without imaging, the investigation cannot verify the event occurred as described, nor could the investigation definitively determine the cause of the reported event.Based on a review of the device's risk documentation, the reported event did not indicate there were any potential or new manufacturing, design, quality, or other systemic issues, or non-conformance's.The complaint code is monitored through the trending process; corrective action is determined, as needed, through this process.Investigations of historic complaint files with similar complaint category coding are recorded in the complaint handling system; without the ability to perform and analysis of the device, this investigation cannot identify with certainty any potential root causes.Batch review: a search for non-conformance's associated with this part/lot number combination did not reveal any production-related issues relevant to the complaint that occurred during manufacturing of the device.Complaint system review: there are no similar complaints based on the complaint category regarding this batch number from the last two years recorded in the complaint system at the time of this investigation.Ifu review (additional information can be found in the ifu): potential complications potential complications include but are not limited to the following: hematoma at the site of entry, aneurysm rupture, emboli, vessel perforation, parent artery occlusion, hemorrhage, ischemia, vasospasm, clot formation, device migration or misplacement, premature or difficult device detachment, non-detachment, incomplete aneurysm filling, revascularization, post-embolization syndrome, and neurological deficits including stroke and death.Users and/or patients should report any serious incidents to the manufacturer and the competent authority of the member state or local health authority in which the user and/or patient is established.Detachment of the device the detachment control device is pre-loaded with batteries and will activate when the delivery device is properly connected.Verify that the rhv is firmly locked around the delivery device before attaching the detachment control device to ensure that the embolization device does not move during the connection process.Ensure that the delivery device gold connectors are clean and free from blood or contrast.If necessary, wipe the connectors with sterile water and dry before connecting.Insert the proximal end of the delivery device into the detachment control device.When the delivery device is properly connected, the light will flash green and an intermittent tone will be heard.Verify the embolization device position before pressing the detachment button.Push the detachment button.During firing, the light should be solid green and the beep should be continuous.Verify detachment by first loosening the rhv valve, then pulling back slowly on the delivery device and verifying that there is not embolization device movement.If the embolization device does not detach, push the detachment button again.If the device is still not detached, obtain a new detachment control device and attempt detachment up to two additional times.If it does not detach, remove the delivery device.Verify the position of the embolization device angiographically through the guide catheter.Prior to removing the microcatheter from the treatment site, place an appropriately sized guidewire completely through the microcatheter lumen to ensure that no part of the embolization device remains within the microcatheter.The physician has the discretion to modify the device deployment technique based on the complexity and variation in embolization procedures.Any modifications must be consistent with the previously described procedures, warnings, precautions and patient safety information in these instructions for use.Investigation conclusion: the physical device was not available for evaluation to determine if a condition existed that would have caused or contributed to event.Supplemental imaging was also unavailable for review; without imaging, the investigation cannot verify the event occurred as described, nor could the investigation definitively determine the cause of the reported event.This information may be updated if additional information is provided at a later date.H3 : device implanted.

Manufacturer Narrative

The sales representative who originally reported the complaint provided further information on 8/01/2023 that indicated, there was no dislocation of the web.The web remained inside the aneurysm sac.No intervention was taken.

• Brand Name: WEB SL 17
• Type of Device: INTRASACCULAR DEVICES
• Manufacturer (Section D): MICROVENTION, INC.; 35 enterprise drive; aliso viejo CA 92656
• Manufacturer Contact: terrence callahan ; 35 enterprise drive; aliso viejo, CA 92656 ; 7142478000
• MDR Report Key: 17000080
• MDR Text Key: 315931774
• Report Number: 2032493-2023-00746
• Device Sequence Number: 1
• Product Code: OPR
• UDI-Device Identifier: 00842429102053
• UDI-Public: (01)00842429102053(11)221117(17)271031(10)0000287831
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: P170032
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,User Facility,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date: 05/10/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 05/24/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: W5-4.5-2-MVI
• Device Lot Number: 0000287831
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Was the Report Sent to FDA?: No
• Date Manufacturer Received: 08/01/2023
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 11/17/2022
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1