MAUDE Adverse Event Report: PERFUSION SYSTEMS DLP AORTIC ROOT ANTEGRADE CANNULA W/VENT; CATHETER, CANNULA AND TUBING, VASCULAR, CARDIOPULMONARY BYPASS

Model Number 24009

Device Problems Obstruction of Flow (2423); Material Deformation (2976)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 05/31/2023

Event Type  malfunction  

Event Description

Medtronic received information that during use of a dlp aortic root cannula with vent line, it was reported that the bond between the main unit and the pressure monitor line was torn.There was blood adhesion.The device was replaced to complete the procedure.There was no adverse patient effect associated with this event.Medtronic received additional information that there was no patient blood loss as a result.There was no transfusion required.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Conclusion: after investigation the complaint is confirmed for damage to the pressure monitoring line.It is unknown what may have caused this occurrence; however, this damage could have been the result of the user attempting to separate the pressure monitoring line from the body of the device.Review of the device history record found no abnormalities during manufacturing that would cause or contribute to the reported event.Complaints received for similar model numbers were reviewed and showed no trends warranting escalation related to this occurrence.There were no adverse patient effects as a result of this incidence.Medtronic has made its supplier aware and will continue to monitor for future occurrences and trends.Correction h6.3 (eval code result (fdr/annex c): this code has been updated.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Device evaluation summary: visual inspection shows evidence of damage/tear in the co-extrusion interface.During, the cleaning process there was a leak observed, from the damaged area/hole.Reason for return was confirmed.Additional information b5: medtronic received, additional information that blood adhesion was referring to the blood that was deposited on the surface, because the defect was noticed, during use.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them, because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank, because the information is currently, unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: DLP AORTIC ROOT ANTEGRADE CANNULA W/VENT
• Type of Device: CATHETER, CANNULA AND TUBING, VASCULAR, CARDIOPULMONARY BYPASS
• Manufacturer (Section D): PERFUSION SYSTEMS; 7611 northland dr; brooklyn park MN 55428
• Manufacturer (Section G): PERFUSION SYSTEMS; 7611 northland dr; brooklyn park MN 55428
• Manufacturer Contact: alison sweeney ; parkmore business park west; galway ; EI ; 091708096
• MDR Report Key: 17133177
• MDR Text Key: 317498988
• Report Number: 2184009-2023-00539
• Device Sequence Number: 1
• Product Code: DWF
• Combination Product (y/n): N
• Reporter Country Code: JA
• PMA/PMN Number: K831591
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Distributor
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup
• Report Date: 08/02/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 06/15/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 24009
• Device Catalogue Number: 24009
• Device Lot Number: 2022110103
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 08/01/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 11/02/2022
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1