Model Number M003UZAS30210 |
Device Problems
Entrapment of Device (1212); Activation Failure (3270)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 06/09/2023 |
Event Type
malfunction
|
Event Description
|
It was reported that during an anterior communicating artery (acom) aneurysm treatment procedure, the physician delivered the subject stent through a microcatheter.Upon deployment it appeared that the distal end of the subject stent did not open.The physician continued to deploy the subject stent and the proximal end opened in the a1 segment.The distal end of the subject stent did not open.The physician encountered resistance when attempting to withdraw the stent delivery wire (sdw) but the sdw felt stuck in the distal segment of the subject stent.After further attempts to pull/ remove the sdw, it was successfully removed.The physician advanced a guidewire and a microcatheter to the distal end of the subject stent.When the microcatheter reached the distal end of the subject stent, the distal end sprung open and fully apposed.The procedure was completed successfully with no clinical consequences reported to the patient.The patient¿s condition was stable and was discharged from the hospital the next day.
|
|
Manufacturer Narrative
|
H3 other text: the device is not available to the manufacturer.
|
|
Event Description
|
It was reported that during an anterior communicating artery (acom) aneurysm treatment procedure, the physician delivered the subject stent through a microcatheter.Upon deployment it appeared that the distal end of the subject stent did not open.The physician continued to deploy the subject stent and the proximal end opened in the a1 segment.The distal end of the subject stent did not open.The physician encountered resistance when attempting to withdraw the stent delivery wire (sdw) but the sdw felt stuck in the distal segment of the subject stent.After further attempts to pull/ remove the sdw, it was successfully removed.The physician advanced a guidewire and a microcatheter to the distal end of the subject stent.When the microcatheter reached the distal end of the subject stent, the distal end sprung open and fully apposed.The procedure was completed successfully with no clinical consequences reported to the patient.The patient¿s condition was stable and was discharged from the hospital the next day.
|
|
Manufacturer Narrative
|
Due to the automated manufacturing execution system (mes) system there are controls in the manufacturing process to ensure the product met specifications upon release.Visual and functional inspections were not performed due to the device was not returned.The reported event is covered in the device directions for use (dfu).As well, the risk of the reported event is documented in the risk documentation and there are current controls to mitigate the risk of the as reported event.The reported event was unable to be confirmed and it cannot be confirmed that the device met specification, as the device was not returned.As the product was not returned and review and analysis of all available information fails to indicate an assignable cause or probable assignable cause for the reported event, an assignable cause of undeterminable will be assigned to the reported defects ¿stent failed/unable to open¿ and ¿sdw stuck in stent.¿.
|
|
Search Alerts/Recalls
|