MAUDE Adverse Event Report: FISHER & PAYKEL HEALTHCARE LTD VENTED AUTOFEED HUMIDIFICATION CHAMBER; AUTOFEED CHAMBER

Model Number MR290V

Device Problems Crack (1135); Fluid/Blood Leak (1250)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 07/10/2023

Event Type  malfunction  

Manufacturer Narrative

(b)(4).The complaint (b)(4), vented autofeed humidification chamber is currently en route to fisher & paykel healthcare (f&p) in new zealand for evaluation.We will provide a follow-up report upon completion of our investigation.

Event Description

A distributor reported on behalf of a healthcare facility in china that a mr290v vented autofeed humidification chamber was found cracked at the side and bottom of the chamber and leaking water before patient use.There was no patient involvement.

Manufacturer Narrative

(b)(4).Method: the complaint mr290v vented autofeed humidification chamber was returned to fisher & paykel healthcare (f&p) in new zealand where it was visually inspected and analysed.Results: visual inspection of the returned mr290v chamber revealed one horizontal crack line was observed.Further testing showed that the rolled base thickness was found to be within specification.Conclusion: we are unable to determine what may have caused the crack of the complaint chamber domes.However our investigation indicates that the crack is most likely due to mechanical stress.The stress source is unknown.The mr290v chambers are designed and tested to conform to iso 5367 breathing tubes intended for use with anaesthetic apparatus and ventilators.Every mr290v chamber is pressure tested following the manufacturing process to check for any leaks present in the chamber dome due to cracks and other causes.Any chamber which fails this test is rejected.In addition, the pressure test is followed by a visual inspection of each chamber.No cracks in the chamber dome are acceptable.Any chamber that fails this inspection is rejected.The subject mr290v chamber would have met the required specification at the time of production.Our user instructions that accompany the mr290v vented autofeed humidification chamber state the following: "do not soak, wash, sterilize, or reuse this product.Avoid contact with chemicals, cleaning agents, or hand sanitizers." "ensure appropriate ventilator or flow source alarms are set before connecting breathing set to patient." "perform a pressure and leak test on the breathing system and check for occlusions before connecting to a patient." "use of the mr290 above the maximum operating pressure may lead to cracking, water leakage and, on rare occasions, could lead to a loss of ventilation pressure" "do not use the chamber if the seals are not intact when received, or if it has been dropped.".

Event Description

A distributor reported on behalf of a healthcare facility in china that a mr290v vented autofeed humidification chamber was found cracked at the side and bottom of the chamber and leaking water before patient use.There was no patient involvement.

• Brand Name: VENTED AUTOFEED HUMIDIFICATION CHAMBER
• Type of Device: AUTOFEED CHAMBER
• Manufacturer (Section D): FISHER & PAYKEL HEALTHCARE LTD; 15 maurice paykel place; east tamaki; auckland, 2013 ; NZ 2013
• Manufacturer (Section G): FISHER & PAYKEL HEALTHCARE LTD; 15 maurice paykel place; east tamaki; auckland, 2013 ; NZ 2013
• Manufacturer Contact: omid taheri ; 17400 laguna canyon road; suite 300; irvine, CA 92618 ; 8007923912
• MDR Report Key: 17339747
• MDR Text Key: 319964468
• Report Number: 9611451-2023-00653
• Device Sequence Number: 1
• Product Code: BTT
• Combination Product (y/n): N
• Reporter Country Code: CH
• PMA/PMN Number: K934140
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,User Facility,Distributor
• Reporter Occupation: Nurse
• Type of Report: Initial,Followup
• Report Date: 07/12/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 07/17/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: MR290V
• Device Catalogue Number: MR290V
• Device Lot Number: 2102153959
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 08/21/2023
• Was Device Evaluated by Manufacturer?: Yes
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Treatment: F&P RT225 INFANT BIAS FLOW BREATHING CIRCUIT.; F&P RT225 INFANT BIAS FLOW BREATHING CIRCUIT.