SYNTHES GMBH TAP FOR 3.5MM CORTEX SCREWS GOLD/110MM; DRILLS, BURRS, TREPHINES & ACCESSORIES (MANUAL)
|
Back to Search Results |
|
Catalog Number 311.320 |
Device Problems
Break (1069); Entrapment of Device (1212)
|
Patient Problem
Foreign Body In Patient (2687)
|
Event Date 07/07/2023 |
Event Type
malfunction
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H10 additional narrative: d9: complainant part is not expected to be returned for manufacturer review/investigation.H3, h6: the investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Event Description
|
It was reported that on (b)(6) 2023, the patient underwent open reduction internal fixation (orif) surgery for oblique fracture of the tibial tubercle with tap for cortex screw 3.5mm.Compression fixation between bone fragments was performed using the lag screw method with cortex screw 3.5mm.The surgeon performed the tapping after the drill was complete.In doing so, he kept pushing and turning the handle with the tap displaced from the hole on the contralateral side.As a result, excessive force was applied to the tap and the tip of the tap was damaged.About 1/3 of the tip of the tap was remained in the patient's medullary cavity.The surgeon determined that extraction would be difficult and continued with plate fixation.The surgeon completed the tibial plate fixation.The surgeon also informed the patient about what remained in the body postoperatively.The surgery was completed successfully without any surgical delay.Patient was listed as stable concomitant device reported: unk - plates: trauma (part# unknown, lot# unknown, quantity 1).Unk - screws: 3.5 mm cortex (part# unknown, lot# unknown).This report is for one tap for 3.5mm cortex screws gold/110mm for (b)(4).
|
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H4, h6: device history record (dhr) review conducted: part# 311.320, lot # 9619523, manufacturing site: werk bettlach , supplier: na, release to warehouse date: 06 nov 2015, expiration date: na.A manufacturing record evaluation was performed for the finished article lot and no non-conformances were identified.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Search Alerts/Recalls
|
|
|