MAUDE Adverse Event Report: MEDTRONIC IRELAND ONYX FRONTIER; CORONARY DRUG-ELUTING STENT

Model Number ONYXNG25015UX

Device Problem Adverse Event Without Identified Device or Use Problem (2993)

Patient Problem Myocardial Infarction (1969)

Event Date 06/27/2023

Event Type  Injury  

Event Description

During the index procedure two resolute onyx drug eluting stents were implanted in the mid and proximal left anterior descending artery (lad).A launcher guide catheter and export ap aspiration catheter were also used during the procedure.During the procedure thrombus embolization occurred.Using the launcher guide catheter, a non-medtronic (mdt) wire was passed through the sub totally occluded area into the main lad.A 2.5 x 15mm balloon was used to pre dilate the area of stenosis to restore flow.However, there was evidence of thrombus embolization and there was slow flow which resulted in a loss of flow in the artery.Therefore, the same balloon was used to perform low pressure inflations to restore flow.Then, an export ap aspiration catheter was used to perform multiple runs, with not much thrombus exported.A 3 x 26mm resolute onyx drug eluting stent was used to cover the area of disease at normal pressures.There appeared to be an area of haziness, and possibly a distal edge dissection.Therefore, it was elected to further stent this area with a second 2.5 x 15mm resolute onyx stent, and the same balloon was used to post dilate the overlap area.A 3 x 20mm non-c ompliant balloon was used to post dilate the entire stented length at low pressures distally, and at high pressures proximally.A good result was achieved with no immediate complications.The patient recovered.The patient was taking dual antiplatelet therapy within 24 hours prior to the event.The investigator and sponsor assessed the event as not related to the device and possibly related to the procedure.The rationale for the relationship to system or procedure was that the patient had stemi with high thrombus burden at lad.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Additional information: the lesion being treated was none to mildly tortuous with 95% stenosis.The patient did not have a history of a prior myocardial infarction.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Additional information: annex d code.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Additional information: it was two onyx frontier stents used during the procedure and not two resolute onyx stents as previously reported.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Additional information: the dissection occurred in the distal left anterior descending artery (lad).Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: ONYX FRONTIER
• Type of Device: CORONARY DRUG-ELUTING STENT
• Manufacturer (Section D): MEDTRONIC IRELAND; parkmore business park west; galway ; EI
• Manufacturer (Section G): MEDTRONIC IRELAND; parkmore business park west; galway ; EI
• Manufacturer Contact: alison sweeney ; parkmore business park west; galway ; EI ; 091708096
• MDR Report Key: 17479239
• MDR Text Key: 320658356
• Report Number: 9612164-2023-03579
• Device Sequence Number: 1
• Product Code: NIQ
• Combination Product (y/n): N
• Reporter Country Code: UK
• PMA/PMN Number: P160043
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Study
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup,Followup,Followup
• Report Date: 11/15/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 08/08/2023
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Device Operator: Health Professional
• Device Model Number: ONYXNG25015UX
• Device Catalogue Number: ONYXNG25015UX
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 11/01/2023
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Patient Outcome(s): Required Intervention; Other
• Patient Age: 75 YR
• Patient Sex: Male
• Patient Weight: 60 KG