Model Number BD-400P-2080 |
Device Problem
Deflation Problem (1149)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 05/30/2023 |
Event Type
malfunction
|
Manufacturer Narrative
|
The suspect device has not been returned to olympus.The investigation is ongoing; therefore, a definitive root cause of the reported event cannot be determined at this time.If additional information becomes available, this report will be supplemented accordingly.Device not returned.
|
|
Event Description
|
The customer reported that the subject device was getting stuck and double deflation was not helping.The reported issue was observed during an unspecified procedure.There was no report of patient or user injury due to the event.Additional details have been requested regarding the reported issue.At this time, no additional information has been provided.
|
|
Manufacturer Narrative
|
This report is being supplemented to provide information that was inadvertently left out of the initial medwatch.This mdr is being submitted as part of a retrospective review and remediation effort based on enhancements made to the company¿s mdr and complaint handling processes.Capas have been opened to manage the actions that are being taken to remediate this issue and ensure any required mdr reporting is completed.
|
|
Event Description
|
Additional information was received from the user facility regarding the reported event (device was getting stuck and double deflation was not helping.): the device was getting stuck in the scope channel during esophageal dilation.The intended procedure was completed using the same device with a delay of 1-2 minutes.Reportedly, the procedure was practically ended when the issue occurred.The device was cut out of the channel.The device was not inspected prior to use.
|
|
Manufacturer Narrative
|
This report is being supplemented to provide additional information that was received from the user facility regarding the reported issue.Information provided in b3 and b5.
|
|
Manufacturer Narrative
|
This report is being supplemented to provide additional information based on the legal manufacturer's final investigation and correction to the initial with information inadvertently left out.A review of the device history record found no deviations that could have caused or contributed to the reported issue.Based on the results of the investigation, it is likely the suggested event occurred due to that occlusion partial or total was generated in the proximal bonding station due to misalignment of the d-mandrel or mandrel during the preparation for bonding process.The operator has not enough visibility to ensure the correct position of the d-mandrel or mandrel, causing melting material smearing occluding partial or total the diameter of the extrude.Causing two events, the first is the diameter is completely occluded which would prevent the balloon from inflating.And the second event would be that the diameter is partially occluded which would cause it to take longer to inflate or deflate.However, the root cause of the suggested event could not be determined.Olympus will continue to monitor field performance for this device.
|
|
Event Description
|
The customer confirmed the patient did not require additional anesthesia.The procedure was completed successfully and the procedure was practically ended when the device malfunctioned.The patient did not experience any adverse effects from the malfunction.This device malfunction did not affect patient outcomes.No other devices used during the event that could have contributed to the malfunction.Other related patient identifiers: (b)(6).
|
|
Search Alerts/Recalls
|