• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: ZIMMER SWITZERLAND MANUFACTURER GMBH ANATOMICAL SHOULDER GLENOID, PEGGED, CEMENTED, M; SHOULDER PROSTHESIS, REVERSE CONFIGURATION

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

ZIMMER SWITZERLAND MANUFACTURER GMBH ANATOMICAL SHOULDER GLENOID, PEGGED, CEMENTED, M; SHOULDER PROSTHESIS, REVERSE CONFIGURATION Back to Search Results
Catalog Number 01.04214.370
Device Problems Fracture (1260); Loosening of Implant Not Related to Bone-Ingrowth (4002)
Patient Problem Failure of Implant (1924)
Event Date 07/26/2023
Event Type  Injury  
Manufacturer Narrative
(b)(4).G2-foreign- south africa.D10: item#:01.04201.122 ;lot#:unknown ;item name: a.S.Humeral stem 12 uncmntd.Item#:01.04212.500 ;lot#:unknown ;item name: a.S.Humeral head d 50 h 18.H3-other: device evaluation could not be performed as part# and lot# unknown.Also device location is unknown.The device will not be returned for analysis; however, an investigation of the reported event is in progress.Once the investigation is completed, a supplemental medwatch 3500a will be submitted.
 
Event Description
It was reported that the patient underwent revision surgery due to loosening and fracture.Due diligence is in progress for this complaint; to date no additional information or product has been received.
 
Manufacturer Narrative
(b)(4).This follow-up report is being submitted to relay additional and/or corrected information.No product was returned.However, four images of the explanted products within the operating theater were provided.Nothing conspicuous could be identified when viewing the explanted humeral stem and head.Another received image shows the humeral stem and humeral head disassembled.There is some signs of wear on the non-articulating surface of the humeral head, possibly due to explantation.The articulating surface of the humeral head is not shown on the images provided.Two images provided show the glenoid component on the articulating and non-articulating surface.On the non-articulating surface, some of the pegs appear to be worn.There seems to be cement residue on the surface area of the non-articulating surface.However, due to the poor quality of the image, this cannot be confirmed.The liner is fractured, but not fully so that there is another fragment, from the inferior portion of the liner up to the closest pug.It is unknown if the fracture was present prior to the revision surgery or if this occurred during revision surgery.Review of manufacturing records cannot be performed without product identification.The device is used for treatment.Medical records were not provided.Based on the given information and the results of the investigation, a definitive root cause cannot be determined.If any further information is found which would change or alter any conclusions or information, a supplemental report will be filed accordingly.Zimmer biomet will continue to monitor for trends.
 
Event Description
No further event information available at the time of this report.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
ANATOMICAL SHOULDER GLENOID, PEGGED, CEMENTED, M
Type of Device
SHOULDER PROSTHESIS, REVERSE CONFIGURATION
Manufacturer (Section D)
ZIMMER SWITZERLAND MANUFACTURER GMBH
sulzer allee 8
sulzer industrie park
winterthur 8404
SZ  8404
Manufacturer (Section G)
ZIMMER SWITZERLAND MANUFACTURER GMBH
sulzer allee 8
sulzer industrie park
winterthur 8404
SZ   8404
Manufacturer Contact
christina arnt
56 e. bell dr.
warsaw, IN 46582
5745273773
MDR Report Key17602121
MDR Text Key321717254
Report Number0009613350-2023-00487
Device Sequence Number1
Product Code KWT
UDI-Device Identifier00889024481008
UDI-Public(01)00889024481008
Combination Product (y/n)N
Reporter Country CodeSF
PMA/PMN Number
K193099
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Foreign,Health Professional,Company Representative
Reporter Occupation Physician
Type of Report Initial,Followup
Report Date 10/26/2023
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received08/23/2023
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? Yes
Device Operator Lay User/Patient
Device Catalogue Number01.04214.370
Device Lot NumberUNKNOWN
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Was the Report Sent to FDA? No
Date Manufacturer Received10/26/2023
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Outcome(s) Required Intervention; Hospitalization;
Patient SexPrefer Not To Disclose
-
-