MAUDE Adverse Event Report: MICROMAR INDUSTRIA E COMERCIO LTDA EASYDRILL PERFORATOR; DRILLS, BURRS, TREPHINES & ACCESSORIES (COMPOU

Model Number DM0010FAA

Device Problems Loss of Power (1475); Device Remains Activated (1525)

Patient Problems Perforation (2001); No Clinical Signs, Symptoms or Conditions (4582)

Event Date 07/31/2023

Event Type  Injury  

Manufacturer Narrative

H3: product analysis: no conclusion can be drawn.Device was returned and the evaluation anticipated but not yet begun.This dm0010faa easydrill cranial perforator with lot number 3489/22 was manufactured by micromar.Multiple warnings are included in the easydrill cranial perforator ifu manual including: it is essential to keep the drill perpendicular (90°) at the predetermined point of the skull to be drilled, as an excessive deviation from perpendicularity may cause the product to fail and lead to serious patient injury.Select a drill bit suitable for the bone thickness.This prevents the drill from tearing the bone or brain tissue (similar effect when the bit is not positioned at 90°).If the components of the easydrill cranial perforator become loose during trephination, discontinue use.The drill can cut or tear the dura mater when it unlocks.Check some conditions before performing the procedure, such as the existence of adhering dura mater or other anomalies adjacent to the drilling site.Continuation of d10: section d information references the main component of the system.Other relevant device(s) are: product id: ad03, serial/lot #: (b)(6), udi#: (b)(4); product id: em100-a, serial/lot #: (b)(6), udi#: (b)(4).Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

It was reported that during awake dbs procedure, a cortical defect occurred as the craniotome did not stop in time.It was reported that there was no intervention perfromed and there was no procedure delay.It was reported that post operation, the patient was alive with no injury.On follow-up it was reported that, the injury appears to have been caused with the reusable other manufaturer perforator (manufactured by bbraun), to continue the procedure they used the disposable and the the plastic housing didn't stop and spinning.It was also reported that the attachement is working fine.

Manufacturer Narrative

H3: product analysis for the deivce ad03: evaluation determined that front housing was worn.The likely cause of failure could not be determined.It was also noted laser markings are faded.Product analysis for the device em100-a: evaluation could not reproduce the reported malfunction of drill was not stopped in time.However, it was noted that motor and collet bearings are worn.This finding may have contributed to the user¿s experience.It was also noted that the device was overheating and the maximum temperature was measured to be 109f.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3: product analysis for dm0011faa: evaluation could not reproduce the reported malfunction of the craniotome did not stop in time.Product working within standards.This dm0011faa easydrill cranial perforator with lot number 3489/22 was manufactured by micromar.Multiple warnings are included in the easydrill cranial perforator ifu manual including: it is essential to keep the drill perpendicular (90°) at the predetermined point of the skull to be drilled, as an excessive deviation from perpendicularity may cause the product to fail and lead to serious patient injury.Select a drill bit suitable for the bone thickness.This prevents the drill from tearing the bone or brain tissue (similar effect when the bit is not positioned at 90°).If the components of the easydrill cranial perforator become loose during trephination, discontinue use.The drill can cut or tear the dura mater when it unlocks.Check some conditions before performing the procedure, such as the existence of adhering dura mater or other anomalies adjacent to the drilling site.We will continue to track and trend this complaint type.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: EASYDRILL PERFORATOR
• Type of Device: DRILLS, BURRS, TREPHINES & ACCESSORIES (COMPOU
• Manufacturer (Section D): MICROMAR INDUSTRIA E COMERCIO LTDA; cnpj: 53.168.142/0001-29; av. marginal ao corrego da ser; sao paulo,sp 09980 -39; BR 09980-39
• Manufacturer (Section G): MICROMAR INDUSTRIA E COMERCIO LTDA; cnpj: 53.168.142/0001-29; av. marginal ao corrego da ser; sao paulo,sp 09980 -39; BR 09980-39
• Manufacturer Contact: natalia matos ; cnpj: 53.168.142/0001-29; av. marginal ao corrego da ser; sao paulo,sp 09980--39 ; BR 09980-39 ; 140575722
• MDR Report Key: 17669382
• MDR Text Key: 322476017
• Report Number: 1625507-2023-00213
• Device Sequence Number: 1
• Product Code: HBF
• UDI-Device Identifier: 07898959543586
• UDI-Public: 07898959543586
• Combination Product (y/n): N
• Reporter Country Code: NL
• PMA/PMN Number: K141455
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup
• Report Date: 01/11/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: DM0010FAA
• Device Catalogue Number: DM0010FAA
• Device Lot Number: 3489/22
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 08/16/2023
• Is the Reporter a Health Professional?: Yes
• Initial Date Manufacturer Received: 08/04/2023
• Initial Date FDA Received: 09/01/2023
• Supplement Dates Manufacturer Received: 09/22/2023; 01/11/2024
• Supplement Dates FDA Received: 10/19/2023; 01/11/2024
• Was Device Evaluated by Manufacturer?: No
• Date Device Manufactured: 12/20/2022
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Treatment: "SEE H10...."
• Patient Outcome(s): Other