BOSTON SCIENTIFIC CORPORATION ELUVIA DRUG-ELUTING VASCULAR STENT SYSTEM; STENT, SUPERFICIAL FEMORAL ARTERY, DRUG-ELUTING
|
Back to Search Results |
|
Model Number 24657 |
Device Problems
Activation, Positioning or Separation Problem (2906); Difficult to Advance (2920); Material Deformation (2976)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 08/17/2023 |
Event Type
Injury
|
Event Description
|
It was reported that the stent partially deployed and elongated.A 7x120, 130 cm eluvia self-expanding stent was selected for use in a superficial femoral artery (sfa) stenting procedure.A contralateral approach was used to access the target location in the sfa that was dissected, moderately calcified, and located in mildly tortuous anatomy.A 7x45 non-boston scientific guiding sheath, a.035x150 non-boston scientific support catheter, and.014x300 non-boston scientific guidewire were placed in the patient.The physician performed 2.0 laser atherectomy on the popliteal as well as the sfa.Afterwards, a non-boston scientific scoring balloon catheter was used to treat the sfa and popliteal residual disease.After angiography, diffuse disease was noted along with dissection, so it was decided to place an eluvia.The vessel was predilated with a 6x100 sterling balloon catheter.The physician proceeded to deploy a 7x120 eluvia.Resistance was felt during advancement.The physician noted that deployment felt 'off' from the beginning.The stent was deploying elongated and not evenly.The physician was unable to traditionally deploy the stent with the thumbwheel.High force was exerted on the thumbwheel.Approximately 80-90mm of the stent was deployed when the physician was forced to pop open the delivery system and perform a salvage deployment.The stent was successfully deployed via the salvage method; however, the stent was elongated roughly 100mm.The stent was post dilated.The blue delivery shaft was noted to be kinked inside the deployment system.The guidewire was then exchanged for a larger diameter guidewire, and an additional 7x150 eluvia was deployed, covering the elongated, improperly deployed 7x120 eluvia.The patient fully recovered.
|
|
Event Description
|
It was reported that the stent partially deployed and elongated.A 7x120, 130 cm eluvia self-expanding stent was selected for use in a superficial femoral artery (sfa) stenting procedure.A contralateral approach was used to access the target location in the sfa that was dissected, moderately calcified, and located in mildly tortuous anatomy.A 7x45 non-boston scientific guiding sheath, a.035x150 non-boston scientific support catheter, and.014x300 non-boston scientific guidewire were placed in the patient.The physician performed 2.0 laser atherectomy on the popliteal as well as the sfa.Afterwards, a non-boston scientific scoring balloon catheter was used to treat the sfa and popliteal residual disease.After angiography, diffuse disease was noted along with dissection, so it was decided to place an eluvia.The vessel was predilated with a 6x100 sterling balloon catheter.The physician proceeded to deploy a 7x120 eluvia.Resistance was felt during advancement.The physician noted that deployment felt 'off' from the beginning.The stent was deploying elongated and not evenly.The physician was unable to traditionally deploy the stent with the thumbwheel.High force was exerted on the thumbwheel.Approximately 80-90mm of the stent was deployed when the physician was forced to pop open the delivery system and perform a salvage deployment.The stent was successfully deployed via the salvage method; however, the stent was elongated roughly 100mm.The stent was post dilated.The blue delivery shaft was noted to be kinked inside the deployment system.The guidewire was then exchanged for a larger diameter guidewire, and an additional 7x150 eluvia was deployed, covering the elongated, improperly deployed 7x120 eluvia.The patient fully recovered.
|
|
Manufacturer Narrative
|
Device eval by manufacturer: returned product consisted of an eluvia self-expanding stent system with a 0.014-inch guidewire stuck in the device.The outer sheath, tip, inner sheath, and the remainder of the device were checked for damage.Visual examination revealed that the handle was open.There was multiple buckling to the outer sheath.There were multiple kinks along the middle sheath and outer sheath.The proximal inner was prolapsed.Microscopic examination revealed no additional damages.Inspection of the remainder of the device revealed no other damage or irregularities.Product analysis found damage that would have contributed to the difficulty to advance, deployment issue and stent deformation.
|
|
Search Alerts/Recalls
|
|
|