Catalog Number 42133E |
Device Problem
Component Missing (2306)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 09/14/2023 |
Event Type
malfunction
|
Manufacturer Narrative
|
H.3.A device evaluation and/or device history review is anticipated but is not complete.Upon completion, a supplemental report will be filed.B3.The date received by manufacturer has been used for this field.
|
|
Event Description
|
It was reported that bd alaris smartsite gravity set needle inside the drip chamber is missing.The following information was provided by the initial reporter: we have had several of these *** that are missing the needle inside the tube.Response received on (b)(6) 2023.¿ are you able to advise the date of event? (b)(6) 2023, (b)(6) 2023 plus other days that was not reported to me.¿ what is the total quantity of affected tubing? - over 20.¿ is there sample available to return for investigation? - yes.¿ was the issue noticed when the product was taken out of package? yes - iv tubing was flowing to fast and was found to be defective.¿ was there any patient involvement? - yes.¿ if yes, was there any adverse event or serious injury reported? no response received on (b)(6) 2023.¿ were any of the events identified during priming of the tubing? - yes, the third occurrence.¿ were any of the defective tubing used on patients? - yes.¿ please describe what the patient involvement was.- the tubing was used on two pediatric patients that were having dental surgery.The tubing was changed out after the surgery was started on both cases.One case the surgery was almost done and the second case was about halfway done.¿ for which occurrence(s) did the patient involvement take place? - the first two occurrences.¿ a missing needle in the drip chamber would not allow for adequate rate circulation.If used on the patient, was the tubing replaced? was rate calculated in a different way? please describe.- the rate was done by anesthesia via free flow, the tubing was changed after the start of the cases and anesthesia noticed that the rate was flowing faster than normal.
|
|
Manufacturer Narrative
|
Three photos and ten samples of item#42133e were submitted for quality investigation.Nine samples of lot# 23019320, and one sample of lot number 23019319, were submitted for quality investigation.The customer complaint of misassembly, was confirmed from the photos submitted and the nine samples with lot #23019320.The sample of lot # 23019319 was not missing the drip chamber needle and was assembled correctly.Further examination of the samples does not indicate any mishandling or abuse of the samples that would cause the drip chamber needles to be removed from the infusion sets.Additionally, the drip chambers are sealed and there is no evidence that the needles are within the drip chamber body.A device history record review for model 42133e lot number 23019320 was performed.The search showed that a total of (b)(4) units in 1 lot number was built on 22jan2023.There were no quality notifications issued for the failure mode reported by the customer during the production build of this set.The root cause for the failure identified in this investigation is a misassembly during the assembly of the drip chamber.Investigation at the manufacturing location indicates that an incorrect part was installed in the assembly due to not clearly all of the previous assembly components from the assembly line.A quality alert was created to reinforce the correct line clearance procedure and assortment of materials on the production line.This incident has been added to our database of reported incidents.Our business team regularly reviews the collected data for identification of emerging trends.
|
|
Event Description
|
No additional information was provided.Material#: 42133e, batch#: 23019320.It was reported by the customer that they have had several of these 42133e that are missing the needle inside the tube.Verbatim: customer reported have had several of these 42133e that are missing the needle inside the tube.Response received on 14-sep-2023.Are you able to advise the date of event? 8/18/2023, 8/28/2023 plus other days that was not reported to me.What is the total quantity of affected tubing? - over 20.Is there sample available to return for investigation? - yes.Was the issue noticed when the product was taken out of package? yes - iv tubing was flowing to fast and was found to be defective.Was there any patient involvement? - yes.If yes, was there any adverse event or serious injury reported? no.Response received on 18-sep-2023.Were any of the events identified during priming of the tubing? - yes, the third occurrence.Were any of the defective tubing used on patients? - yes.Please describe what the patient involvement was.- the tubing was used on two pediatric patients that were having dental surgery.The tubing was changed out after the surgery was started on both cases.One case the surgery was almost done and the second case was about halfway done.For which occurrence(s) did the patient involvement take place? - the first two occurrences.A missing needle in the drip chamber would not allow for adequate rate circulation.If used on the patient, was the tubing replaced? was rate calculated in a different way? please describe.- the rate was done by anesthesia via free flow, the tubing was changed after the start of the cases and anesthesia noticed that the rate was flowing faster than normal.
|
|
Search Alerts/Recalls
|
|