MAUDE Adverse Event Report: COVIDIEN MEDICAL PRODUCTS EMPRINT; ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES

Model Number CA20L2

Device Problems Connection Problem (2900); Appropriate Term/Code Not Available (3191)

Patient Problems Appropriate Clinical Signs, Symptoms, Conditions Term / Code Not Available (4581); No Clinical Signs, Symptoms or Conditions (4582)

Event Date 09/12/2023

Event Type  Injury  

Event Description

According to the reporter, during a procedure, the two antennas has not been detected by the generator, and the "?" alarm ("antenna not identified") remain displayed.The customer stated that it came from the cable because a procedure has been performed successfully previously the same day with the same cable, and after this event the antenna that worked on the previous procedure was not identified anymore as the two others, whereas it was well identified sooner. the procedure was cancelled - patient under anesthesia. it was planned to be rescheduled, but the date remains unknown yet.There was no patient injury.

Manufacturer Narrative

D10: concomitant product: ca190rc1 - ca190rc1 ablation reusable cable x1, serial# (b)(6), ca15l2 - ca15l2 15cm rein percutaneous antenna x1, lot# s23cg012 cagenhp - hp ablation gen cagenhp, serial# (b)(6).Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

According to the reporter, during a procedure, the two antennas has not been detected by the generator, and the "?" alarm ("antenna not identified") remain displayed.The customer stated that it came from the cable because a procedure has been performed successfully previously the same day with the same cable, and after this event the antenna that worked on the previous procedure was not identified anymore as the two others, whereas it was well identified sooner. the procedure was cancelled - patient under anesthesia. it is planned to be rescheduled, but the date remains unknown yet.

Manufacturer Narrative

New information has been received pertaining to the event.This event has been reassessed and the reportability has been determined to be a serious injury.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Evaluation summary: medtronic conducted an investigation based upon all information received.The device was available for evaluation.The evaluation found no potentially contributing factors, and the sample met all related specifications.It was reported that the antenna was not detected by the generator and the alarm was displayed.The reported issue could not be confirmed.The most likely cause could not be identified because no related problem was detected with the device.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: EMPRINT
• Type of Device: ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES
• Manufacturer (Section D): COVIDIEN MEDICAL PRODUCTS; building 10- no 789 puxing roa; shanghai 20111 4; CH 201114
• Manufacturer (Section G): COVIDIEN MEDICAL PRODUCTS; building 10- no 789 puxing roa; shanghai 20111 4; CH 201114
• Manufacturer Contact: justin ellis ; 8200 coral sea st ne; mounds view, MN 55112 ; 7635265677
• MDR Report Key: 17866005
• MDR Text Key: 324900511
• Report Number: 3006451981-2023-00129
• Device Sequence Number: 1
• Product Code: GEI
• UDI-Device Identifier: 10884521806559
• UDI-Public: 10884521806559
• Combination Product (y/n): N
• Reporter Country Code: FR
• PMA/PMN Number: K163105
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup
• Report Date: 12/22/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: CA20L2
• Device Catalogue Number: CA20L2
• Device Lot Number: S22HG007
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Initial Date Manufacturer Received: 09/12/2023
• Initial Date FDA Received: 10/03/2023
• Supplement Dates Manufacturer Received: 10/10/2023; 11/29/2023
• Supplement Dates FDA Received: 10/27/2023; 12/22/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 08/10/2022
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Treatment: SEE H10
• Patient Outcome(s): Other