Model Number HL 20 |
Device Problem
Pumping Stopped (1503)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 09/28/2023 |
Event Type
malfunction
|
Event Description
|
It was reported that the error message "safety-s" was displayed on a hl20 pump.The instance of time was not provided.No harm to any person has been reported.Complaint id: (b)(4).
|
|
Manufacturer Narrative
|
The investigation is ongoing.A getinge technician will investigate the hl 20.A follow-up medwatch will be submitted when additional information becomes available.
|
|
Manufacturer Narrative
|
It was reported that the error message "safety-s" was displayed on a hl20 pump.The failure occurred during a routine check.No harm to any person has been reported.A getinge field service technician (fst) was sent for investigation and repair on 2023-10-10.The safety system board was replaced.The fst performed safety, calibration, and functionality checks to factory specifications.All function tests are passed.The affected safety system board was not made available for further investigation.However with reference to the hl20 risk assessment (risk id: h1.1.1.2.6) the most probable root cause is wrong pump speed because of: - communication error (e.G.Wrong ratio between master-slave pumps due to communication error) the review of the non-conformities has been performed on 2023-10-06 for the period of 2018-05-15 to 2023-09-28.It does not show any non-conformity in regard to the reported product and failure.There is no indication that manufacturing issues occurred during this time, thus production related influences are unlikely.The device was manufactured on 2018-05-15.Based on the results the reported failure "error message safety-s" could be confirmed.The customer will be informed about the results by the getinge sales and service unit.The occurrence rate was calculated for the reported issue and it was determined that this is not a systemic issue.Therefore, no remedial action is required.The occurrence rate related to the reported issue is currently being monitored as part of maquet cardiopulmonary¿ s trending program and additional investigations or corrections will be implemented in case of adverse trending.
|
|
Event Description
|
Complaint id: (b)(4).
|
|
Event Description
|
Complaint id: (b)(4).
|
|
Manufacturer Narrative
|
The investigation is ongoing.A getinge field service technician (fst) was sent for investigation and repair on 2023-10-10.The safety system board was replaced.The fst performed safety, calibration, and functionality checks to factory specifications.All function tests are passed.The review of the non-conformities has been performed on (b)(6) 2023 for the period of 2018-05-15 to 2023-09-28.It does not show any non-conformity in regard to the reported product and failure.There is no indication that manufacturing issues occurred during this time, thus production related influences are unlikely.The device was manufactured on 2018-05-15.A follow-up medwatch will be submitted when additional information becomes available.
|
|
Search Alerts/Recalls
|