Catalog Number AB2000 |
Device Problem
Visual Prompts will not Clear (2281)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 10/06/2023 |
Event Type
malfunction
|
Manufacturer Narrative
|
H.6 adverse event problem: component code 4756: per the instructions for use, the aquabeam motorpack, a re-usable component of the aquabeam robotic system, provides power to the aquabeam handpiece by means of dc motors.Root cause of reported event has not yet been established.Investigation by manufacturer is currently in-process.Submission of this report does not constitute an admission that the manufacturer's product caused or contributed to the event.
|
|
Event Description
|
A male patient underwent an aquablation procedure for symptomatic benign prostatic hyperplasia (bph).Procept biorobotics corporation became aware that during the aquablation procedural set-up, the aquabeam robotic system generated an "e22 - motorpack error" message, which was resolved using troubleshooting steps.However, during the jet alignment phase, upon firing the jet, the "e22 - motorpack error" message was generated, and it couldn't be cleared despite multiple troubleshooting attempts.A second aquabeam handpiece was used, but the error persisted.A second aquabeam motorpack was also utilized, but the error still persisted.A third aquabeam handpiece was used, and the aquabeam robotic system generated an "e05 - console error." as a result, the aquablation procedure was aborted and converted to greenlight laser therapy.There were no adverse health consequences to the patient due to this event.
|
|
Manufacturer Narrative
|
The aquabeam handpiece was returned for investigation.Visual inspection of the returned device revealed no physical damage or anomalies.Functional testing of the device was able to reproduce the "e22 - motorpack error," but it was subsequently cleared, and attempts to reproduce it were unsuccessful.The handpiece was then deconstructed and observed under magnification, revealing signs of fluid ingress in the form of salt deposits on one of the r-optical sensors.This could potentially be one of the triggers for the e22 error that couldn't be cleared during the treatment phase of the procedure.As the saline dried out, it removed the short circuit and restored functionality within the handpiece.The exact cause of how the e22 error was triggered remains undeterminable, as the e22 that was triggered was found to be transient.The aquabeam robotic system's treatment logs file was reviewed, which confirmed the reported event.A review of the device history record (dhr) ab2000-b / serial number (b)(6) and aquabeam handpiece / lot number lot23c02977 was conducted, which confirmed that there was one (1) non-conformance issued to this lot during the manufacturing process that could potentially be related to the reported event.The affected units within the lot were reworked to address the nonconformance.Upon re-inspection, the lot met all required specifications and was then deemed acceptable to be released for distribution per device specifications.The aquabeam robotic system user manual, um0101 rev.F, states the following: table 5: system detected errors and faults e22 - motorpack error release foot pedal and click x.1) if error persists, reconnect handpiece to motorpack.2) if error continues, replace handpiece e05 - console error release foot pedal and replace handpiece.Then turn off and turn on console.Submission of this report does not constitue an admission that the manufacturer's product caused or contributed to the event.
|
|
Search Alerts/Recalls
|
|