MAUDE Adverse Event Report: MEDTRONIC, INC. DUAL CHAMBER TEMPORARY PACEMAKER; PULSE-GENERATOR, PACEMAKER, EXTERNAL

Model Number 5392

Device Problems Contamination (1120); Failure to Power Up (1476)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 10/02/2023

Event Type  malfunction  

Event Description

It was reported that the external pulse generator (epg) would not power on.It was noted that the batteries were changed out but the issue persisted.The epg has been returned for evaluation and subsequently tested out of specification during manufacturer's analysis.There was no patient involvement.

Manufacturer Narrative

Product analysis: analysis was able to confirm the customer comment that the epg would not power on.At analysis it was determined that multiple parts of the epg were contaminated that included the liquid crystal display (lcd), the main printed circuit board (pcb), the keypad flex, the encoder stems, two knobs, three case screws, a main pcb screw and the lower case which was also broken.It was further noted that the output connector assembly, the hanger assembly, the upper case and the main seal were broken.All found defective parts were replaced and all other identified issues were resolved.The instrument then passed all final functional tests.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: DUAL CHAMBER TEMPORARY PACEMAKER
• Type of Device: PULSE-GENERATOR, PACEMAKER, EXTERNAL
• Manufacturer (Section D): MEDTRONIC, INC.; 8200 coral sea street ne; mounds view MN 55112
• Manufacturer (Section G): MEDTRONIC, INC.; 8200 coral sea street ne; mounds view MN 55112
• Manufacturer Contact: paula bixby ; 8200 coral sea st ne; mounds view, MN 55112 ; 7635055378
• MDR Report Key: 18002442
• MDR Text Key: 326466414
• Report Number: 2182208-2023-03196
• Device Sequence Number: 1
• Product Code: DTE
• UDI-Device Identifier: 00763000162443
• UDI-Public: 00763000162443
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K150246
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional
• Reporter Occupation: Biomedical Engineer
• Type of Report: Initial
• Report Date: 10/25/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 10/25/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 5392
• Device Catalogue Number: 5392
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 10/09/2023
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 10/13/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 01/11/2019
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Reuse
• Patient Sequence Number: 1