MAUDE Adverse Event Report: MEDOS INTERNATIONAL SÃ RL TRUESPAN 24 DEGREE PEEK; FASTENER, FIXATION, NONDEGRADABLE, SOFT TISSUE

Catalog Number 228152

Device Problem Difficult to Advance (2920)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 10/20/2023

Event Type  malfunction  

Manufacturer Narrative

This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by mitek or its employees that the report constitutes an admission that the device, mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Device was used for treatment, not diagnosis.H10 additional narrative: e3: reporter is a j&j sales representative.D4,h4: the device manufacture date and expiration date are unknown at this time.Udi: (b)(4).Unknown.As of this date, the device has not been returned for evaluation; therefore, the reported condition cannot be confirmed and/or duplicated.

Event Description

It was reported by the sales rep that during an unspecified meniscal repair procedure on (b)(6) 2023 the truespan 24 degree peek device plate could not fix the meniscus after deployment.Another device was used to complete the surgery.There was no delay in the procedure reported.There were no adverse patient consequences reported.No additional information was provided.

Manufacturer Narrative

This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by mitek or its employees that the report constitutes an admission that the device, mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: d9, h3, h6: the actual device has been returned and is currently pending evaluation.Once the device has been evaluated, a supplemental medwatch report will be sent accordingly.

Manufacturer Narrative

This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by mitek or its employees that the report constitutes an admission that the device, mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Investigation summary : according to the information provided, it was reported that during the surgery, the plate couldn't fix the meniscus after deployment.Another device was used to complete the surgery.There were no adverse consequences to the patient.The complaint device was received and evaluated; visual inspection reveals that the red trigger is not broken and one of the plates is out of the applier needle.The functional test was performed with the remaining plate, a soft tissue simulator was used; the device performed as intended, no obstruction was observed during the insertion and deployment of the plate.A manufacturing record evaluation was performed for the finished device 135l663 number, and no non-conformances were identified.As part of depuy synthes mitek quality process all devices are manufactured, inspected, and released to approved specifications.Based on the investigation findings, the reported complaint can be confirmed.The possible root cause for the reported issue can be attributed to procedural variables, such handling of the device or product interaction during procedure.The depth penetration of the tissue was not maintained, therefore, the plate did not fully trespass the soft tissue and it was pulled out along with the device.As per ifu 113244 fully squeeze the red deployment trigger while maintaining depth positioning to deliver the first implant.The implant is fully deployed when you hear an audible ¿click¿.At this point in time, no corrective action is required, and no further action is warranted.However, depuy synthes mitek will continue to monitor additional complaint information for potential safety signals through complaint trending as part of post market surveillance.

• Brand Name: TRUESPAN 24 DEGREE PEEK
• Type of Device: FASTENER, FIXATION, NONDEGRADABLE, SOFT TISSUE
• Manufacturer (Section D): MEDOS INTERNATIONAL SÃ RL; chemin-blanc 38; le locle 02400 ; SZ 02400
• Manufacturer (Section G): MEDOS INTERNATIONAL SARL; chemin blanc 38; le locle CH-24 00; SZ CH-2400
• Manufacturer Contact: kate karberg ; 325 paramount drive; raynham, MA ; 3035526892
• MDR Report Key: 18003331
• MDR Text Key: 326480637
• Report Number: 1221934-2023-03870
• Device Sequence Number: 1
• Product Code: MBI
• UDI-Device Identifier: 10886705026029
• UDI-Public: 10886705026029
• Combination Product (y/n): N
• Reporter Country Code: CH
• PMA/PMN Number: K153667
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,User Facility,Company Representative
• Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup
• Report Date: 10/25/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 10/25/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 228152
• Device Lot Number: 135L663
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Date Manufacturer Received: 11/23/2023
• Was Device Evaluated by Manufacturer?: Yes
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1