EDWARDS LIFESCIENCES EDWARDS INTUITY ELITE VALVE SYSTEM; HEART-VALVE, NON-ALLOGRAFT TISSUE
|
Back to Search Results |
|
Model Number 8300AB |
Device Problem
Difficult or Delayed Positioning (1157)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 12/09/2022 |
Event Type
Injury
|
Event Description
|
Edwards received notification that a 3300tfx25mm valve was explanted at implant from the aortic position due to paravalvular leak (pvl) [reported under medwatch # 38566].A 23mm intuity elite valve was unsuccessfully attempted to be implanted.This second valve was also explanted at implant due the valve not correctly adhering to the annulus [this report].Finally, a 23mm magna ease valve was successfully implanted in replacement.As reported, due to the prolonged surgery time, decision was made not to performed the planned treatment for the mitral insufficiency.The patient was transferred in stable condition to the hemodynamic room for coronary angiography study in consideration of the severe myocardial dysfunction at the right coronary artery area.Unfortunately, the patient died some time after procedure for unknown reason.
|
|
Manufacturer Narrative
|
H10: additional manufacturer narrative: the device was not returned for evaluation.Attempts to retrieve the device and additional information is in process.The investigation is still in progress; therefore, a conclusion has yet to be established.A supplemental report will be submitted accordingly upon investigation completion.Edwards will continue to review and monitor all reported events.Trends are monitored on a monthly basis and if action is required, appropriate investigation will be performed.
|
|
Manufacturer Narrative
|
Added information to section h6 (type of investigation), d4 (expiration date) and h4 (device manufacturer date) updated section h6 (investigation findings) and h6 (investigations conclusions).The device history record (dhr) review was completed and this device passed all manufacturing and sterilization inspections prior to release for distribution.There were no issues identified that would have impacted this event.Valve explant at implant is typically a result of inappropriate sizing, difficulty seating, distortion of the valve, valve displacement before/after frame expansion, and/or the patients anatomy, and not a malfunction of the device.The instructions for use (ifu) have been reviewed and no inadequacies have been identified with regards to warnings, contraindications, and the directions/conditions for the successful use of the device.The reported type of event is included in the ifu.The most likely cause is patient factors, including patients fragile tissue caused by a previous endocarditis.
|
|
Event Description
|
Edwards received notification that a 3300tfx25mm valve was explanted at implant from the aortic position due to paravalvular leak (pvl) [reported under medwatch # 38566].A 23mm intuity elite valve was unsuccessfully attempted to be implanted.This second valve was also explanted at implant due the valve not correctly adhering to the annulus [this report].Finally, a 23mm magna ease valve was successfully implanted in replacement.Reportedly, both explants at implant were due to the patients fragile tissue caused by a previous endocarditis and not to a problem with the use of edwards devices.As reported, due to the prolonged surgery time, decision was made not to performed the planned treatment in the mitral valve that presented mild regurgitation.The patient was transferred in stable condition to the hemodynamic room for coronary angiography study in consideration of the severe myocardial dysfunction at the right coronary artery area.Unfortunately, the patient died seven (7) days after procedure due to multiorgan failure.Per medical opinion, the prolonged intervention did not caused the patient death.Instead, the several comorbidities and the fragility of heart tissues due to endocarditis contributed to a serious injury in the patient.Additionally, it was confirmed that the use of edwards devices did not cause or contribute to the patients death.
|
|
Manufacturer Narrative
|
Added information to section b5 (describe event or problem), d4 (serial number).H10: additional manufacturer narrative: the investigation is still in progress; therefore, a conclusion has yet to be established.A supplemental report will be submitted accordingly upon investigation completion.Edwards will continue to review and monitor all reported events.Trends are monitored on a monthly basis and if action is required, appropriate investigation will be performed.
|
|
Search Alerts/Recalls
|
|
|