MAUDE Adverse Event Report: SYNTHES GMBH DRILL BIT Ø1.8 L100/75 2FLUTE F/QC; DRILL, BONE, POWERED

Catalog Number 310.510

Device Problem Failure to Cut (2587)

Patient Problem Insufficient Information (4580)

Event Date 10/27/2023

Event Type  malfunction  

Event Description

Device report from synthes reports an event in colombia as follows: it was reported on october 27, 2023, that the drills bit without edge, so the specialist was dissatisfied.Prolongation of surgical times.This report is for one (1)drill bit ø1.8 l100/75 2flute f/qc.This is report 2 of 3 for complaint (b)(4).

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H10 additional narrative: d9: complainant part is not expected to be returned for manufacturer review/investigation.E3: reporter is a j&j sales representative.H3, h6: the investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: h4 device history part: 310.510.Synthes lot: u410324.Supplier lot: u410324.Release to warehouse date: july 22, 2022.Supplier: (b)(4).No ncrs were generated during production.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H3, h6: the device associated with this complaint was returned for examination.Visual analysis of the device found blunting/ rounding of cutting edges.It is not unreasonable that the condition identified in visual analysis would contribute to a dull condition.Therefore we are able to confirm dullness with damage observed, as this kind of evidence indicates repeated use of the device.The lifecycle requirements of the device are event related and depend on the use in clinical practice, the device must be properly inspected prior to each surgical use.Refer to the device/country specific ifu for information related to end of life, reprocessing instructions, and inspection procedures.A dimensional inspection was not performed since it was not applicable to the complaint condition.The overall complaint was confirmed as the observed condition of drill bit ø1.8 l100/75 2flute f/qc [310.510/u410324] would have contributed to the complained issue.Based on the investigation findings, the potential cause is traced to end of life, and it has been determined that no corrective and/or preventative action is required.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: DRILL BIT Ø1.8 L100/75 2FLUTE F/QC
• Type of Device: DRILL, BONE, POWERED
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO 80132
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 18144574
• MDR Text Key: 328206485
• Report Number: 8030965-2023-14432
• Device Sequence Number: 1
• Product Code: DZI
• UDI-Device Identifier: 07611819018808
• UDI-Public: (01)07611819018808
• Combination Product (y/n): N
• Reporter Country Code: CO
• PMA/PMN Number: K043310
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 11/15/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 310.510
• Device Lot Number: U410324
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 01/03/2024
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 07/22/2022
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1
• Treatment: DRILL BIT Ø2 W/DOUBLE MARKING L140/115 3; DRILL BIT Ø2.5 L110/85 2FLUTE F/QUICK CO