CONMED UTICA LINVATEC H/C LIGHTWAVE ABLATOR; ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES
|
Back to Search Results |
|
Catalog Number IA-2379 |
Device Problem
Self-Activation or Keying (1557)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 11/21/2023 |
Event Type
malfunction
|
Manufacturer Narrative
|
The reported device is being returned to conmed for evaluation.A supplemental and final report will be filed following the completion of the device evaluation and complaint investigation.We will continue to monitor for trends through the complaint system to assure patient safety.H3 other text : device not yet received.
|
|
Event Description
|
The sales representative reported on behalf of the customer, that the ia-2379, linvatec h/c lightwave ablator was being used during an arthroscopy procedure on (b)(6) 2023 when it was reported ¿it was "triggering" on its own even without pressing the button, and sometimes when activated it also didn't work, the device was changed twice, to see if the defect was in the equipment, but the error was repeated.We were informed that there was no harm or injury to the patient, did not fall fragments on the patient.Another product was used to replace it; however, they decided not to use it again.Surgery time was affected.¿.Further assessment questioning found that there was an approximate 20-30 minute delay.The procedure was completed and the current status of the patient was reported as ¿the patient is doing well, the doctor was able to carry out the complete procedure despite the defect.¿.There was no report of injury, medical intervention or extended hospitalization to the patient or user.This report is being raised on the reported malfunction with potential for injury upon reoccurrence.
|
|
Event Description
|
The sales representative reported on behalf of the customer, that the ia-2379, linvatec h/c lightwave ablator was being used during an arthroscopy procedure on (b)(6) 2023 when it was reported ¿it was "triggering" on its own even without pressing the button, and sometimes when activated it also didn't work, the device was changed twice, to see if the defect was in the equipment, but the error was repeated.We were informed that there was no harm or injury to the patient, did not fall fragments on the patient.Another product was used to replace it; however, they decided not to use it again.Surgery time was affected.¿.Further assessment questioning found that there was an approximate 20-30 minute delay.The procedure was completed and the current status of the patient was reported as ¿the patient is doing well, the doctor was able to carry out the complete procedure despite the defect.¿.There was no report of injury, medical intervention or extended hospitalization to the patient or user.This report is being raised on the reported malfunction with potential for injury upon reoccurrence.
|
|
Manufacturer Narrative
|
The console doesn¿t recognize the device and won¿t operate due to ¿replace probe error¿.The disposition is ¿inconclusive¿ because the device cannot be made to activate.A likely cause of this issue is due to tissue or fluid ingress into the button site affecting button depression.The manufacturing documents from the device history record have been reviewed with special attention to the manufacturing and inspection of the product.The product released for distribution was found to have met all specifications prior to shipment.This is the only complaint for this lot number and failure mode within the past two years.A two-year review of complaint history revealed there has been a total of 2 complaints, regarding 2 devices, for this device family and failure mode.During this same time frame (b)(4) devices have been manufactured and shipped worldwide.Should all the complaint devices have been found confirmed for this reported failure, the rate of failure would be (b)(4).Per the instructions for use, the user is advised the electrical shock hazards and safety considerations: a) this equipment is capable of producing a physiological effect and is for use only by licensed physicians trained in the use of this device.B) examine all accessories and connections to the generator before use.Ensure all accessories are properly and securely connected and function as intended.Improper connection may result in arcing, sparking, or malfunction of the device, any of which can result in an unintended surgical effect, injury, or equipment damage.We will continue to monitor for trends through the complaint system to assure patient safety.
|
|
Search Alerts/Recalls
|
|
|