MAUDE Adverse Event Report: DEPUY SYNTHES PRODUCTS LLC EMAX 2 PLUS MOTOR; MOTOR, SURGICAL INSTRUMENT, AC-POWERED

Catalog Number EMAX2PLUS

Device Problems Device Alarm System (1012); Excessive Heating (4030)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 01/01/2023

Event Type  malfunction  

Manufacturer Narrative

This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: as of this date, the device has not been returned for evaluation; therefore, the reported condition cannot be confirmed and/or duplicated.Udi: (b)(4).

Event Description

It was reported from taiwan that the motor device console indicated an e6 error code and the motor was heating up.It was not reported if the device was used in surgery, or if there was patient involvement.It was not reported if there were any delays in the surgical procedure, or if a spare device was available for use.It was not reported if there were any injuries, medical intervention or prolonged hospitalization.The date of event was unknown but was known to have occurred in 2023.All available information has been disclosed.If additional information should become available, a supplemental medwatch will be submitted accordingly.

Manufacturer Narrative

This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: the actual device was returned for evaluation.During repair, an evaluation was performed and it was determined that the device displayed an e6 error code, the flex circuit was damaged and run in the locked position.The device also failed pretests for cable assessment, motor thermistor assessment and safety assessment.The reported condition of the device heating up was not confirmed.The assignable root cause was traced to component failure due to normal wear.

• Brand Name: EMAX 2 PLUS MOTOR
• Type of Device: MOTOR, SURGICAL INSTRUMENT, AC-POWERED
• Manufacturer (Section D): DEPUY SYNTHES PRODUCTS LLC; 4500 riverside drive; palm beach gardens FL 33410
• Manufacturer Contact: kate karberg ; 4500 riverside drive; palm beach gardens, FL 33410 ; 3035526892
• MDR Report Key: 18410229
• MDR Text Key: 331514458
• Report Number: 1045834-2023-01760
• Device Sequence Number: 1
• Product Code: GEY
• UDI-Device Identifier: 00845384002055
• UDI-Public: 00845384002055
• Combination Product (y/n): N
• Reporter Country Code: TW
• PMA/PMN Number: K080802
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,User Facility
• Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date: 12/28/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: EMAX2PLUS
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Initial Date Manufacturer Received: 12/20/2023
• Initial Date FDA Received: 12/28/2023
• Supplement Dates Manufacturer Received: 02/20/2024
• Supplement Dates FDA Received: 02/21/2024
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 04/15/2021
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1