MAUDE Adverse Event Report: SMITH & NEPHEW, INC. JOURNEY DCF AP FEM CUT BLK 4; PROSTHESIS, KNEE, FEMOROTIBIAL, SEMI-CONSTRAINED, CEMENTED, METAL/POLYMER

Catalog Number 74012414

Device Problem Fracture (1260)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 12/11/2023

Event Type  malfunction  

Manufacturer Narrative

Internal reference number: (b)(4).H10: smith & nephew is submitting this report pursuant to the provisions of 21 c.F.R.Part 803.This report may be based upon information which smith & nephew has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, smith & nephew, or its employees, that the report constitutes an admission that the device, smith & nephew or its employees caused or contributed to the potential event described in this report.

Event Description

It was reporter that, during a tka, after cuts and removing the journey dcf ap fem cut blk 4, the back of it fractured.No pieces fell into the surgical incision.The procedure continued without any delay.Patient was not harmed as a consequence of this problem.

Manufacturer Narrative

The device was not returned for evaluation.However, the photographs were reviewed, and revealed that the spiked cross bar detached from the journey dcf ap femoral cutting block size 4.Additionally, a small section of one of the device's holes is cracked.A review of the production order did not reveal a manufacturing abnormality that could have caused or contributed to the reported incident.A review of complaint history revealed similar events for the listed device over the previous 12 months, but no similar events for the batch based on the historical data, this failure mode will be monitored for future complaints for any necessary corrective actions.A review of the risk management file revealed this failure mode was previously identified.The anticipated risk level is still adequate.A historical review concluded that there are no prior actions related to this product and event.At this time, we have no reason to suspect that the product failed to meet any specifications at the time of manufacture.This device is a reusable instrument that can be exposed to numerous surgeries.Damage from prolonged use, misuse or rough handling are likely potential factors that could contribute to the reported event.We recommend that all reusable instruments be routinely inspected for wear and damage and replaced as necessary.Based on this investigation, the need for corrective action is not indicated.Should the device or additional information be received, the complaint will be reopened.No further investigation is warranted for this complaint; however, we will continue to monitor for future complaints and investigate as necessary.We consider this investigation closed.

• Brand Name: JOURNEY DCF AP FEM CUT BLK 4
• Type of Device: PROSTHESIS, KNEE, FEMOROTIBIAL, SEMI-CONSTRAINED, CEMENTED, METAL/POLYMER
• Manufacturer (Section D): SMITH & NEPHEW, INC.; 1450 brooks rd.; memphis TN 38116
• Manufacturer (Section G): SMITH & NEPHEW, INC.; 1450 brooks rd.; memphis TN 38116
• Manufacturer Contact: holly topping ; 7000 west william cannon drive; austin, TX 78735 ; 5123913905
• MDR Report Key: 18419483
• MDR Text Key: 331618675
• Report Number: 1020279-2023-02635
• Device Sequence Number: 1
• Product Code: HRY
• UDI-Device Identifier: 03596010556660
• UDI-Public: 03596010556660
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K121393
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,User Facility
• Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date: 01/23/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 74012414
• Device Lot Number: 19DM21991
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Initial Date Manufacturer Received: 12/11/2023
• Initial Date FDA Received: 12/29/2023
• Supplement Dates Manufacturer Received: 01/22/2024
• Supplement Dates FDA Received: 01/23/2024
• Date Device Manufactured: 04/22/2019
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1